man, I feel so damned discouraged about my engine snaffu:cry: . I really don't know what to do about this problem. The pistons are screwed up and...
mavman thanks for the positive feedback and i appreciate that fact that you have hell of lot of knowledge on these parts. I don't know what the...
http://store.summitracing.com/partdetail.asp?part=MLE%2DSBF090040F06&autoview=sku :dance: :cheers: :yahoo: :tup: :clap::D
well I removed the pistons from the block and the crank look great. The pistons looked like they were marred by something and thats what caused...
dk I have spiral locks on it and it has the 347 slugs in it i think maybe the oil ring reinforcement ring man I just dont know.:mad:
Well I will have to get the gouges out so I was thinking that I can get the block bore another 10 to c if I can get them out and salvage the block...
Well after replacing oil pump, I checked oil pressure and temperature and everything come out pretty good. So, I always take a final compression...
ditto what mavman said and oh hell no never ever use rtv on trans, the excess will squeeze out when the pan is tightened and it will get in the...
hey blair here some food for thought http://flashoffroad.com/electrical/CurrentDrain/currentdrain.pdf
did you put in any amps for the radio if so unplug power to those as well this will just eliminate circuits when you start pulling fuses and make...
hey by the way I kind figured you had the meter leads cross bcus if you reading those numbers with the key off and you have that much dcv that...
this is the way the hook up should look
hey this site will help you set the meter just incase there might be an error in the connections or a misunderstanding...
hey all you have to do disconnect the negative cable from battery. take one lead from the meter and put it on the ground terminal and the other...
dont mean to rant sorry I just check for ampdraws with meter I turn everything off and remove the ground terminal and place on lead of my meter on...
why the heck do guys insist on changing the alternator if it has an external regulator and the malfunction usually exist in the regulator, thats...
mityvac hand pump
eddie make sure that you have the firing order going counterclockwise on the dissy that happen to me just yesterday.
oil pressure seems to be too high with the engine running at idle my oil pressure is 80 psi and with engine at part throttle the oil pressure is...
well the motor is all new and the pump is new adn runs great sound good the oil pump pressure worries me. I guess I will have to check the...
Separate names with a comma.
