I just rebuilt the carb, and plugged all the vacuum lines, except for the distributor. The gaskets i used are mr gasket 223, they have no exhaust...
I was wondering if anyone has gone to an aluminum intake and had trouble with vacuum leaks after installation. should I use silicone or some...
if anyone cares:D..... i found a large vacuum leak where the egr, that I blocked off with a gasket and plate is leaking, big time. Another leak...
You could try the overlooked autolite 4100. Check out pony carbs.:thumbsup:
I am going to try starter fluid or wd40 to check for leaks tomorrow.
Hello people. I need a few ideas as to what's up with my 302. The car only runs when the choke is nearly shut and at a fast idle. When I try...
i had a stock carter yf on my comet when it was a 200. i then switched to a carter rbs, which were common on 250's. it made a big difference...
RPS did have door panels available, but i did not see them the last time i visited the website. these were the panels minus the vinyl upholstery...
[ATTACH]here is what were talking about -a spacer that burned through. i swapped this baby out with a 289 unit[ATTACH]
that is a good piece of knowledge (exhaust blocking) and the carb info. I have seen some cool 2 barrels though, like the holley 350 and 500 cfm...
That's what i like to hear; it's how a lot of things were done in the early days before you could just go and buy performance off the shelf. I...
I hear that, but I like 2V carburetors. I thought the factory aluminum 2V might flow and perform a little better.:)
Has anyone used a 2 barrel aluminum intake from a 79ish 302? I was thinking of installing one that I have for weight saving etc. Do they breathe...
thanks guys. :Handshake
some conclusions apparently the V8 pressure line is shorter than the I6 pressure line, but I have read that they need to be longer, as well as...
good day people! I am having some problems with power steering hoses. I just put a 302 in my 72 comet gt and ordered new power steering hoses....
I saw that one for sale I think, but spent my surplus flying to Spokane to buy a 72 comet gt, it's what I wanted anyway. I actually drove back...
The 73 bumpers are a lot better than the 74-77 bumpers, you could eat dinner off of them!:D
To do it right, take your time and drill out all your spot welds. You can cut the panel off your comet beyond the attachment points, then when...
That was my issue with ACC, I wanted a 2 piece set to be factory correct (I always have to have everything original, that's just me) :)
Separate names with a comma.
