Hi all. I just completed the Shelby drop on my car, which was just something I opted for while doing a power front disk brake conversion. I...
Yes thanks, it's all good. I have a 14 inch steel magnum 500 for a spare and it went on. Some people have had trouble with those fitting disc...
Missed one
Well, I got the firewall holes drilled and the brake pedal assembly installed. It went easier than I thought; the old clutch and brake assembly...
Yes, it's the hub there is only one hub size available for these dynacorn magnums. 15 inch x 7 or 8.
Thanks for the reply. I think I will machine the wheels, looks like a lot of meat there to work with, there is a shoulder or step on the inside of...
Oh, and would it be a good time to do a Shelby drop? Curious if anyone's done that thanks.
Well, I started the front disc brake conversion. I have a 77 Maverick parts car that will be giving up its spindles, booster, brake pedal...
After owning my car for 7 years now, I swapped out the stock 200 and 3-speed top-loader for a 5.0 and a C4. That was the second year I owned the...
Finished my floor finally. Here are some pictures after the rust is cleaned up, and then after the carpet is down.
Hello all, I recently received the new carpet I ordered, so I began the job. The seats, carpet, and old sound insulation has been removed. I have...
A rebuilt 1.08 V 2150 motorcraft or a 1.14 V 2100 autolite would make it run the best if it is stock. If you want a 4 barrel, buy a smaller one...
The autokrafters panels fit very poorly. I could not get my wheel well trim to fit on them. If you can keep any of the factory flanges, like...
When I swapped out a 200 for a 302, my front end was too low so I went with v8 springs, with no noticable alignment issues. Try six cylinder...
Cool, ANY parts no matter the size are a good thing.
That looks pretty cool, minus the mustang side scoops, imo. It needs some nostrils on the hood for the grabber version and the scoop can stay for...
A couple things I ran into over the years was: 1) engine was fine and then....bad idle, no power, stalling; I removed a valve cover and found 2...
Thanks, I know the old 'plies don't handle well. ......if only a radial was made that had that same look. It's a product of their construction i...
I would like to put on some polyglas tires. I love the look. I might go with BF radial T/A though. I think the wide F60/15 would look good on...
I put a 1.12 on my 302 with gt40 heads and an edelbrock intake, but i had trouble getting it to run right; always too rich even with small jets...
Separate names with a comma.
