3/8" shorter uppers will really mess with camber on lift it you ask me. SPark
For what I'm doing at this time, I'm using closed chamber 4bbl heads with just a mild cleanup, Manley Race Flo valves and a Comp valve train....
The last engine I had in my dirt late model was a Motorsports G351 block with a very nice set of Ernie Elliot heads and intake that made over...
Talked to Kaase about a Boss "9" upper end kit. Heads, rockers, valves, springs, cam, intake, pistons, valve covers and a plug wire set run right...
This car is being built as a 1970 Pro Stock tribute car to 1970 NHRA rules. I've always loved the 1st year Pro Stocks and the Mav was my favorite....
I don't remember them having the square sumps. Usually a stock style pan with a strip of metal (1-1/2 to 2") added and the bottom of the sump...
Back to work! Sold my Falcon so I have a lot more room to work now. Also have more money. If you've seen my other thread on fiberglass hoods,...
Ok, I've pulled the trigger. Ordered from US Body Source thru Jegs. That way Jegs is the shipper and all that is charged to me is a $69 oversize...
Instead of a clutch cable, look into a hydraulic slave or hydraulic throw out bearing. Several kits out there. SPark
I would have traded on the spot. It's getting hard to find 4 speeds and if it includes a rebuild kit it's a no-brainer. I paid $1000 for a...
There comes a point in time you want it to be "right". I don't want a cheap piece of crap, I don't want to deal with hassles getting it like I've...
All I can find at Crites is Grabber hoods. Unfortunately, that is just wrong for what I'm doing. I have literally hundreds of pictures of...
That's another reason I'm leaning towards VFN. I'm about 5 hours away from them and I could just pick it up in person. Yes, gas costs money but...
I have searched, and found a lot of bashing. Several threads but other than recommendations to the carbon fiber hood, not much info except UP22...
Those are bigger than 15" diameter by several inches! What size tires are those? I know nothing about pro touring sizes. Most use an inch or 2...
My guess is with that wide of a tire under a narrow Maverick, the car will be "twitchy". Keep your spring base as wide as possible or the rear of...
Before tackling the rear clip, I would suggest deciding on your front suspension setup and decide if you are doing "Pro Street" (looks like a pro...
Sold it Sunday. Want to spend more on the '69.5 Pro Stock Maverick and '62 F100 unibody. Think it's going to a good home. SPark
I've done several cars. You must have your wheels and tires to make it work right. Set them where you want them to set, block them in place at...
Just got done showing my wife these pics and we had the exact same discussion before I even read the next post. I get on thru here and find these...
Separate names with a comma.
