Deck is 2" treated lumber. Aluminum trailer with a steel subframe for the torsion axles to mount to so they don't work on the aluminum. The right...
I use a '99 F250 4x4 V10 Super Duty to pull this one. [IMG] [IMG] [IMG] SPark
Can't help you tune an Edelbrock. Never had one or even wanted one. Build a lot of Holleys while racing but never touched one of the Edelbrock...
To answer your question - YES! The 351M/400 style headers will fit a 351C 2bbl head. As the others said, will not fit a 351W and they will...
The dead spot is either timing still a little lazy or the pump squirter on the carb is not right. What is timing set at and does it want to...
After you finish #1, go on the #2 and repeat until you are done with that side. If you hook up a remote starter button you can bump it over from...
http://www.race-cars.net/calculators/compression_calculator.html SPark
On a Chevy they always go between the crank and flywheel. I think they are probably OK for normal street driving.....but who does that?!?!? SPark
Drip rail removal is an old custom thing. It's very expensive to have done. It is a lot of work on any car. You'll basically be welding the roof...
Are you talking about one of these? http://www.summitracing.com/parts/mcl-460050/overview/ Your flywheel would have to have the holes in it for...
You are adjusting your valves at the wrong time. Try this procedure. 1) Using a long handled ratchet or breaker bar attached to the crank bolt,...
I happen to have 2 old SBF aluminum flywheels that have had weights bolted to them to balance at 28oz. I don't think they are stock as it is an...
ALL 6cyl engines I am aware of are -0- balance, you don't need it until you start opposing cylinders in a "V" formation because forces are...
All 351's use a 28oz SPark
28 oz will have a weight about 3" long welded/bolted to the flywheel or it will have a large area that is removed to lighten one area drastically....
Welcome from SE Iowa, used to have a '57 F100 myself. Kind of miss it but have enough irons in the fire! SPark
I put a set on mine last year but for a 9" with 3" axle tubes and they worked OK. Haven't put shocks on it yet. The other problem is they are too...
I see your "pockets" now. Since it's rare piece over there, I would find another hood that has a similar "crown" to the panels and weld in new...
We ran them at 10.25:1 on gas with Windsor SR, Windsor JR were around 11.25 and ported 289 heads at 12:1. We never broke a set of them. We limited...
You can get KB Hyper pistons with rings in a standard bore. They also have a forged piston you can also get in a standard bore. You can usually...
Separate names with a comma.
