How about: First year of the V-8 engine in a Maverick? (Or am I incorrect).
I found this trim tool to be really useful to remove the clips from a Maverick / Comet heater box, especially if you are worried the fibreglass is...
Here is what that cross member looks like.( probably not the right term), but since I have the dash taken apart I hope to resolve the cable issue...
No. I only unhooked the cable from the control box when I pulled it out. It always had the problem from when I got the car in 2015. I have the...
Welcome from western Canada. :tiphat:
What was probably the most significant thing about the 73 Maverick?
[ATTACH] [ATTACH] Hi Craig. The cross member is the piece of steel that runs along the low side of the dash with two bolts fastening it at each...
I want to check the operation of the temperature control cable. Any idea what I need to remove to get to it. I already have the cross member...
Fired up the car and took it to the car wash. The hose connections are holding fine. Now to top up and then take care of some issues with the temp...
Thanks everyone. Got them on. Cleaned up some glue nodules that were along side the foam and corrected the position of the foam inside the front...
Welcome from British Columbia, Canada. :tiphat:
[ATTACH] [ATTACH] I finished changing my heater core and re-conditioned the flapper box which controls whether hot air or cold air is drawn...
Got the new hoses installed. I completely drained the rad and removed the hose clamps from the hoses. I had to cut the water pump hose off the...
[ATTACH] [ATTACH] I got my plenum clipped back together. Recall from an earlier post I was having trouble getting the clips on. I pulled the...
I got my plenum box back together but cannot get it snug enough to get the clips back on. Then I pressed one side tight enough to get clips...
Primed and painted the rusty retaining ring for the fan assembly. Transferred the control box to the plenum half still bolted to the firewall,...
Finished glueing the seals on the control box and did a test fit on the outside half of the plenum. ....
I just posted an article on Maverick Specifications on Tech Articles. You need to be logged in to read it. MD Enjoy
I don't know if this was posted before but here are the general specifications for all the years and models of Mavericks. Enjoy. MD...
Separate names with a comma.
