Noticed the other day that my spoiler is coming off. On one side its lifted away from my trunk lid enough to wiggle a little and let water...
My 650 DP does it too. Timing made it better but couldn't eliminate it. I think it's the accelerator pump too. Doesn't do it when not under load.
Not to mention the Fox Aluminum ones are available. Good times :dance:
I Have a T-5 in mine and a 9" rear and all I needed was the U joint. Fox shaft was a dead on fit. a lot beefier too.
Or you could just switch it to a 5-Speed like I did. O.D. is wonderful.
The XE274 HR is the cam that seemed to be the best compromise. It gets a lot of good press from different Mags and engine builders as one of the...
Well. My D.S.S. 331 is on its way. They shipped it today. It is the Pro Bullet 331 with Stud main girdle and windage tray. Has 13cc dish pistons...
I saw that add. Why didnt he include the hood? Is it a car he bought for those specific parts?
My 72 V-8 Grabber clocked in at 2840 without me in it. I have since added a 9" rear (40+ LBS more) and sub/connectors (40) But also swapped the...
Heavy duty truck 9" rears and big block cars had them (31 spline) I think. Oh and the BOSS 302.
I did the axle tube swap on a late 70s 9" out of a family car. weighs 40 LBS more than the 8". Installed 3.70 gears and a Detroit Locker. Cant...
The late 80s early 90s Taurus 2 speed fan is a great fan. They are every where at the junk yard and flow massive amounts of air. My friend...
O.D. is wonderfull. I have a T-5 in front of my 3.70s. Turns them into 2.52s in overdrive.... With the AOD and its .67 overdrive 4.56 = 3.05...
Best ones are the forged piston roller motors found in 85-92 Mustangs. Watch out for 86 models though. Forged but no valve reliefs. Some Lincolon...
The 255 is garbage. It made 111- 117 HP at the flywheel depending on the year. If you are running an automatic you're looking at about 80-90 HP at...
Ok I know I must have asked this before. But I cant find the old thread. I have a D.S.S. 306 with main girdle Forged dished (13cc) pistons and...
My 72 has a modern T-5 5-Speed clutch. I bought a 28 oz flywheel for the 10.5 inch 5.0 clutch. We had to make a custom crossmember (Pretty easy)...
Ok I screwed up they are called Torsen. No H.
The Torshen and traction lok diffs can be found on the net or maybe in Summit. The Detroit locker is a matter of taste. I dont mind the occasional...
I used a set of sub connecters from Mustangs Plus. Mounted no problem everything lined up and welded them in. Big difference in ride quality :)...
Separate names with a comma.
