I would put in the engine that fit (302-331-347) then if that's not enough apply a little boost later. Of course that depends on budget.
I was thinking of getting a set of these for the ol' 650 DP that's on the 302, and will be going on the 331 I will be installing whenever things...
Mine gets around 16 on the freeway. It's an old 302 with a bigish cam ported big valve Windsors, 3.70s and a T-5. Likes to cruise in the 65-70...
Mine's in the trunk. Now there's an MSD box in its place.
I wouldn't waste my money on stock heads ported or not. My friend just scored a set of assembled aluminum Pro-Comp heads off ebay for $560. that...
I believe they make shorty/mid length headers for older Mustangs that will fit Mavericks. I don't think 5.0 shorties will clear the shock towers.
Don't the 200 CI six cars in addition to 4 lug wheels have smaller drums than the 5 lug V-8 cars? My 72 302 has the factory drums and I really...
You have to consider what niche will it fit into. Ford can't support multiple pony cars any more. So it would have to be downstream from the...
I love 2.3T motors. That thing should be a lot of fun. Good luck :)
I think the HP and torque will be pretty close to what they were with the F.I. The difference being that the F.I. motor constantly tunes your...
Not much involved in converting an injected motor to a carbed motor just need the intake and timing cover and eccentric off an older 302. Oh and...
I have two cars on the list!!!! My Pinto kicks ass. :dance::dance: Small ass but it kicks it.:burnout: 2.0 4-Speed trunk car. It's actually...
Yea, Not trying to be a stick in the mud. I do have an old Twisted Torker as they call them. It's gasket matched and the ports are cleaned up same...
I do believe that the magazine worries about manufacturers pulling their advertising. And pulling advertising would hurt Edlebrock too. but that...
HHHHmmm. Yes it does seem like it's a little low. I cant think of anything else aside from the motor being 37 years old and it was 33 with about...
I do remember the test had a Funnel web single plane in it too. Might have been different issues. The Air Gap and the other newer dual planes beat...
Do they still make port plates for the 4 Barrel Cleveland? They block the weird bottom dead area on the exhaust side and effectively raise the...
I did a cam, ported 351 big valve heads, exhaust, intake and 4 bbl carb on the stock 72 302 with 3.70s and a 9" rear, and a 5-speed. It was so...
I was going off a magazine dyno shoot out between several of the common dual planes and a single plane Victor on a ford small block. At street...
I guess it depends on what the goal is. If it's just to have fun with the six then by all means. You have all the time you want to add a piece...
Separate names with a comma.
