great to see you back running! those goodguys courses are tight!
it wont be quieter. the limited slip additive is for clutches. it was explained to me that its basically very little balls. when the clutches...
that doesnt look like an limited slip. it does look like it could be a locker. lockers do not need limited slip additive. it wont hurt anything...
Performance Friction Carbon Metallic Racing Brake Pads http://www.hrpworld.com/store/default/01-compound-12mm-thick-race-ready.html these pads...
ive considered doing this on some conversions but havent yet. http://www.tanksinc.com/index.cfm/page/ptype=product/product_id=84/mode=prod/prd84.htm
looking forward to see your videos! do you know the weight of your car? are you running in cam-s this year?
here are some videos from sunday. [MEDIA] [MEDIA] i was stoked. i had no spin outs the whole weekend. worst thing i did was to over shoot a...
this could be your problem. if the u joint straps are over tightened they will distort the cap and pinch the rollers. the torque on the nuts is...
how tight did you tighten the u joint straps to the diff yoke? how easy do the u joints rotate in the drive shaft?
thanks for checking jay
around here (san diego) we only have 1/8th mile tracks. i find them very boring. i plan on going to fontana some time to run their 1/4 mile some...
its difficult to drive the car and get out of car video! it is cool. i would like to try to do a split screen sync of in car and out side video...
i went autocrossing again today. it was hot! 90 degrees. i didnt spin out this time! in the first video i go on the wrong side of a cone early...
Im wondering if anybody going to the knotts show has some windshield trim, specifically the passenger side top piece. im missing this piece. it...
it requires an adaptor to be swapped on to the front of the case to work with a t5 bellhousing....
the only thing ive ever encountered in a differential to cause a vibration is if the pinion bearing preload is loose. if you can wiggle the yoke...
looking good.
installing that long stud in the rear axles will be fun. most likely the axles will have to be pulled. still less work that swapping the whole...
that looks like it will only bolt on to 3 of the 4 lugs. seems like a step backwards.
that type of plug wire end is hard to put on and not make contact. i believe you in your confidence that it was making contact. i hope taylor...
Separate names with a comma.
