what ever the cost that is a sweet set up. are going to a 3 link?
ive looked at caster camber guages. my wheels are aluminum so a magnetic one wont work. and honestly what info does it tell me that an angle...
so i have been going to the autocross pretty frequently. i have started to get an understanding of what and why the car behaves the way it does....
i put a plate that is bent in 2 places. it starts along the trunk floor where 2 layers overlap, then bends down the side of the frame rail and...
plain old 120 wall tubing. the all knowing mr sutton said that 120 mild steel is over kill. i dont remember exactly what he said the minimum is...
i have finished my pan hard bar project on my car. it was an interesting process. i started wanting to do a watts link thinking that its necessary...
ill be there with the car.
fords need a 45 degree or 120 degree spark plug wire boot. also ignition electronics can be a nightmare if they are low quality. odds of them...
get the ford motorsport ac eliminator kit http://www.summitracing.com/parts/fms-m-8511-a50
ive heard of using soap chips also. just any thing you can push in and then hydraulic the pilot bushing out.
hey Kevin, if the grease trick doesnt work (and it usually does) i have a slide hammer with a puller attachment you can borrow that will pull it...
did you bench bleed the master cylinder?
what shocks are you running? with my double adjustable shocks, when i have them backed all the way off it rides really soft, and when they are...
are you using an suction cup mount?
man that looked awesome. ill have to look into doing it when they come to fontana! question for all. what go pro camera angles do you guys like...
i would install the engine and bellhousing together. then stick the trans in from the bottom. do a test fit on the trans to the bellhousing before...
i agree with krazy, i still dont see the problem! my wife wont drive my car because of no power steering or brakes. my car is staying no power...
grade 5 will bend more before breaking than grade 8. i agree that it seems like bad geometry and thats about what i expect from addco.
both bolts on mine bent. they never broke. i would leave them alone. now the addco way of mounting to the frame will rip through the frame pretty...
im running the ps box with as much caster ask i can put in the car with 255x40-tires and it steers nicely. i hated the ms box. it was like...
Separate names with a comma.
