You have to shim A-arms for caster adjustment? How you like the CPP setup?
I got increased caster shims in UCA 3+ both sides. I'm using Saginaw pump had to use shims in pressure side to reduce steering sensitivity over...
Looking to go LS w/ it? :huh:
Only way to know for sure -- If you have the manifold "Try it, and end the suspense!
Today I decided to go ahead and do complete cover gasket set since I have half stuff off I needed to do it. I was at parts store yesterday getting...
Hadn't even considered cover is possibly suffering from corrosion/porosity. Thanks for the suggestion. I don't want to do this just once, upon...
Looks dry around housing! I thought that might be an issue, but, find no evidence of that. I'm going to inspect again; really don't feel like...
I think that's where the leak is. I have coolant resting on top of the cover and all hose connections are dry. I'm almost sure I'm going to pull...
Started the process replacing water pump, recently developed a serious leak, couldn't see where leak was coming from. The weep hole is dry,...
You mean "71Gold" Frank --- FYI.
Choke plate open on cold start = hard start & poor drivability b4 engine warms. Assuming you have elec. choke, check to see if ur getting voltage...
Installing points/plugs will not affect timing; loosening dist. fastner and rotating it will move timing. I not quite sure what your conveying...
I agree w/ majority advocating do disk conversion seeing the need for rebuilding system. Sitting 18 years, system need rebuilding. No matter how...
Welcome David --:wave:-- from northeastern Illinois! Love to see your pictures whenever you get around posting them.
I wouldn't think that's enough to have low batt. starting once a month. Is the charging sys. putting out 14 or so volts? I would think my stero...
If fluid came out of boot seal is bad. I replaced my mc yesterday and have two new rods, if I don’t forget, will measure them tomorrow let you...
I've had one on my car a few years, changed from factory p/s steering. Got rid of all the leaking hoses and whining pump. I had some issues early...
Thanks for the reply/info. I'm going w/ the stat that's in car now, mostly just need to stop/figure out my leak. Are you using CI or alum. on the...
I have a coolant leak I believe is coming from water pump seal/bearing. Pump is not whining, and I can't say for certain that's where leak is...
Very strange, only growling fwd/left turning; seems it would growl turning left going either direction. I thought you had changed to pwr rack,...
Separate names with a comma.
