I use the MAXI fuse sized circuit breakers for the fans. They make 20, 30, 40, 60 amps for sure, I'm sure many other sizes as well, and they fit...
Those look nice in there, Dave. Now that I have relays, that would be the next logical upgrade. I tried some of those Pilot "upgrades" and I...
With the other work I've seen of yours, I think you'll be fine making them. The fender alignment has some wiggle room and you're in the middle...
The Taurus radiator is a cross flow, as long as you have space, it will fit.
My original engine was ford dark blue. It's a 72. Some of the parts store paints are different colors for different brands even if you...
I use an impact bit driver that you hit with a hammer in the field and I use my 3/8" impact gun on the lowest air setting and light trigger at the...
I have to admit when I did this install(1999), no one I knew had done a T5 in a Maverick and it was all trial and error, not to mention I was...
I cut a significant portion of the upper trans hump and removed the brace. Some guys have done it without removing anything but the brace, but my...
Mine were T50
What do you guys mean by "reverse flow"?
Excellent information! I have argued with a few friends around here in the past about the different timing covers and ran across it again when I...
The temp sensor only measures coolant temperature at the sensor itself. Coolant temperature varies significantly in different locations in the...
My side markers do not alternate with the turn signals. Yours is a 71? Come to think of it, none of my Mavericks/Comet did that either. If...
Those will do. I have also seen a couple of guys cut down a bolt from a hardware store. I don't know the thread size at the moment. I wrote it...
The thermactor holes are the ones in the back of the heads on your Bronco that attach to the air pump. There is a pipe that goes from head to...
Either an electric fuel pump or change the timing cover and add the eccentric for the mechanical pump, steel gear on your distributor for the...
Nice! I like the fact that you incorporated the curve back into the tower. Looks like it was designed that way instead of being modified.:yup:
Depending on coolant mixture, temperature and cap pressure ratiing, releasing coolant after shut off could be normal. Add an overflow tank(even a...
I paid $89 for mine from autokrafters a few years ago used. The next catalog I got had a new one listed for just over $100
I, too am a borgenson fan. Unless you are changing everything, like the M2 conversions or big money like the RRS or TCI racks, the borgenson is...
Separate names with a comma.
