Welcome from Woodstock GA!
I'm still running a stock intake. I have an Edelbrock Performer that I haven't put on yet due to clearance issues with my custom shock tower braces
I went through several cables from the cheap aftermarket (2) to Steeda's adjustables (2) and finally ended up with a factory replacement that is...
I may be wrong, but the ones in the summit picture appear to fit high port heads. CrazyComet's look like the ones for stock 302 exhaust bolt...
Still better to run 2 smaller puller fans as opposed to a pusher.
X3! Those use the properly shaped fabricated plates that go behind the sheet metal to prevent pull-through and tearing in the event you actually...
That's awesome!! Congratulations!:thumbs2:
The 300ci is a completely different head/engine family. Some components of the 240ci and 300ci are interchangeable, but not with the 170/200/250ci...
Beautiful car.:thumbs2: I like the 73's with a bumper tuck as much or better than the small bumper cars.
I think it's just the angle of the camera. The rear holes are slightly lower than the front holes. I used the StreetorTrack UCA's and their...
Yeah, the cracks that developed were just below the welds on those side pieces radiating from the spot welds that attach the thicker metal on the...
[ATTACH] Here's a pic after a coat of paint.
I used the original drawings I found somewhere on the internet out of the Boss 302 modifications and made my own templates out of cardboard since...
I have replaced mine for a squeaking concern, but I modified the housing to use a late model Taurus unit. I don't know if all of them are the...
There is also the TransAm mod for the 69-70 Mustangs that works well for solid reinforcement of the lower towers once it's lined back up if you...
Does it appear that the strut rod mount crossmember could have sustained damage? If it's pushed back, it will move the lower arms back as well....
Looks good!:thumbs2:
[ATTACH] I found a mugshot of my car online at killboy.com from last weekend:burnout:
Congratulations!:thumbs2:
Ran some mountain twisties this past weekend in TN/NC/N. GA. Car seemed to perform well, handled decent for a leaf sprung car. Had a...
Separate names with a comma.
