My findings with the front sway bar: I pulled a 1-1/4" bar from our '65 Mustang that had been raced before we bought it, and after playing with...
My Champion 3 row most likely would have bolted up directly if my front end wasn't all bent up from a previous owner's incident with a ditch. The...
Finished porting my stock Ford heads in preparation for my new engine build!
Does that mean I should be able to just cut it and not have to worry about it anymore?
How exactly does it cause a problem? Adds another step to my EFI install project...
There is definitely a metal gasket on my 8", and I know it's not a 9". I messed it up and now I can't get the axle and flange back on correctly so...
They aren't the same part, I need to pull one of the pistons and check what markings I can.
When I bought a Harbor Freight welding cart and plopped a welder on it, it flexed and bent and almost tipped over-- it had to be welded together,...
I have a relatively new Hobart MIG welder and I love it. It wasn't too expensive and it's great-- I had to deal with a Harbor Freight POS for a...
Nope, it has a circular dish PLUS reliefs in the shape of valves. Like this!
I am using a larger, 100 micron pre-pump filter since small stuff won't mess up the pump and it flows better. After the pump I'm using a 30-micron...
It has dished pistons with valve eyebrows. After doing some porting work on some C9TE's I have (identical to the C8OEs, I just messed up and...
How is the road feel with the power rack?
I made the mistake of not using a prefilter temporarily with my nice Summit pump... and mounted it on the driver's side shock tower. It pumps the...
Thank you! All cast stuff, right?
Alright, so I found out the block I'm working with (putting into the Maverick) is a C8OE, a 1968/69 302 and it's .030 over. Other than that this...
I pulled most of the top end out of an '87 Thunderbird HO. I have the E7TE heads and HO intake manifold, I just need injectors to complete that....
I have shoulder belts (3-point) from a Nissan Stanza, as well as the bucket seats from it. They're better than lap belts safety-wise and...
I consider 5 seconds pretty quick, I'm shooting for about 5 with my Tbird HO EFI motor once the weather gets dry and I get fatter tires than the...
I think you're right. I have the top end (sadly no cam, a roller won't fit in my block) from an '87, the one with the full port-injected EFI...
Separate names with a comma.
