I just put in a pertronix. Used the wire that went to old ignition coil to trigger a painless wiring relay. From relay to new pertronix ignition...
A few questions that I am not sure about. Appreciate all the help. She's all timed, carb is adjusted...no more stalling or backfires. Or carb...
The backfire ended up being a spark plug cable that came loose ... Going to give it a tune tomorrow and see how I do.
I'll do an update once the tach and vacuume gauge arrive. Hopefully that solves it.
What would you suggest as a starting point? I was getting a backfire with factory settings, 2 1/2 turns seemed to fix that. I am also plugging...
Wolf, How did this shake out? I think I have a similar problem... idles high in park, once in drive it's fine until I really give it some...
Jerl's muffler and brake. Danny did the work.
Flow master 50 delta series.
I picked her up this morning. I'll wire in the cutouts tonight. Here's a quick clip of what she sounds like. I think she's running a little...
Still have to put in the H pipe[ATTACH][ATTACH][ATTACH][ATTACH]
They did it without cutting bell housing or grinding the pitman arm.. I spoke with Jamie from Doug Thorley and he offered to do it if the shop...
Thanks Craig. Was able to stop the shop before they cut into bell housing or did any grinding on pitman arm. Was also able to get a hold of...
They are going to trim bell housing and grind pitman a bit... I'll post photos when done.
Yeah I searched...so many posts on the topic. Took a while to find Craig's thread.
I hope these photos help the dudes at the shop... more to come tomorrow. I'll post photos when it's all done. Thanks for this post Craig!
Anyone have any photos of how they cleared this... I spoke with Jamie from Doug Thorley and he said the shop needed to do a bend on a bend. The...
On the rack!
Fixed vacuume leak, set timing to 10 degrees and drove her to the muffler shop. They said duel exhaust with the spectra tank would not be an...
Not really sure... suspecting a vacuumed leak caused the back fire as it fire originated from carb and then caught the fuel line which melted the...
Backfire caused by vacuum leak... Hopefully easy to find and fix.
Separate names with a comma.
