THANKS! But I will screw up so many things before it ever runs. I am a rookie compared to most of you all. Thanks for helping me along the way....
I got impatient waiting for my rebuilt C4 tranny. They can't seem to find drums for the smaller shaft in the early 1970's C4. So, I installed my...
Got my seat tracks prep'd and ready to paint for Fred Carello's seat covers next week:). Upholstery, big $:([ATTACH]
After a long delay in trying fixing my original C4 Transmission full of nonstock parts, I refurbished the heater box today! Way too simple, why...
Be careful, I got a PS pitman arm from them for my 71 Maverick. It don't work for manual. My error, so look close at what you are ordering. I...
[ATTACH] I cut out one coil and WOW what a difference! Now I'm concerned that I cut off too much. The upper arm is now 1/2 inch above the...
Pulleys! No, I rented one. Now it is clear I will have to buy one since this will be trial and error. I got my compression tool today and I...
Thanks all, I will check the uninstall height specs after I remove them, after I buy a spring compression tool which I was hoping to avoid. It...
I installed new front springs on a stock 1971 Maverick front end (Melvins Part # CS8304 for a V-8). After 302 engine install, I saw absolutely no...
And I landed an engine today. Unfortunately, it is not looking as good as Krazy Comet's yet, but I'm working on it. It will have to come back...
texasbb14, If you really are interested in the Corporate Food Orange, I'd be willing to send you my sprayout. I'd suggest taking it to a car...
They are all PPG 2 stage paints. The one closest to Calypso Coral is 69982 (known as "Corporate Food Orange") and was not ever a stock color for...
I want to add that I did find the bastard fitting at a Brakequip dealer for my new master cylinder lines. A 9/16-18 female to 3/8-24 male (P/N...
Old thread here, but to answer your question, the 66 signal flare red from 1966 Mustangs looks a little more Orange than Calypso Coral based on...
Try that again, a Tab submits the thread! Below is what I have learned about US brake line sizes: Tube Size......Hex Size......Standard Nut...
OK, I'm summing up what I learned from everyone: Below is a summary of standard brake line fittings today Tube Size
To answer your question, I have an adjustable proportioning valve on the rear line that was supplied with my CSRP disk conversion. I have yet to...
Thanks for the heads up on the copper washer. I have an adaptor there and now that you mention it, it seemed to bottom out. Any other tricks on...
Thanks for the info and it explains why there is always conflicting information. It sounds like you are planning this right. It sure would have...
Look at this rat's nest! And I''m still missing two fittings ?!?#$%$#$ [ATTACH]
Separate names with a comma.
