Just joined MCCI. Washington PA is only 20 miles from where I grew up and drove my first 1971 Maverick in 1974. I'll try hard to be there,...
I bent new Transmission lines yesterday. I only had the nut on the wrong side of the bend 2 times. A longer day than necessary again! Next time,...
Success today. I did my calculations and added 1/2 inch to the shifter arm to get the desired full travel from 1st to park. With this, some...
Thanks for the suggestion. I'm thinking this is all a big geometry problem. If I'm lucky, I can just extend the shifter arm slightly so it moves...
No good news from me. Nothing worked right at all. With my stock floor shifter in 1st, the linkage lines up perfectly with the tranny 1st gear....
With consideration of the floor shift vs column shift comments, I will be trying to fit a 69-73 Mustang floor shift linkage into my stock 72...
Budget seats. My son's machine! Custom made mounts (angles, washers and other junk welded together) with sliders, seats and belts from Summit....
These seats are from another forum member. This picture sold me on re-upholstering my highback bucket seats as original. I have the new covers...
Injectedmav, Thanks, you just paid for my subscription to the forum x 5! Yes, the shifter body fits this bolt pattern and the cover screws into...
After I got the Tranny in, the next thing was the shifter. Surprise, it doesn't fit my floor pan plate bolt holes. I bought this car as a...
Thanks for the heads up. This was one screwed up tranny during rebuild. I was told the final assembly used a 1964 C-4 guts, but no idea what the...
Mavgrab302, If interested, I have a left side front apron "front" that was cut out of a good car (everything in front of the shock tower). It was...
Finally got the Transmission in. Maybe this will run before spring! [ATTACH]
I overreacted...feeling better now...... I had used strength serviceable blue loctite. I applied just a little heat (hot to the touch only) and...
I got my rebuilt C4 Tranny to put back on to my 302 today. While waiting months on it, I got impatient and started engine assembly before I...
Ok, you lined me up with him earlier this year! Thanks. I do know he had major e-mail issues over the summer that he has since resolved. Also,...
I just got his seat covers in the mail a week ago. Can't wait to get them complete! These are just how I remember them. Here is his contact...
Thanks. I'm thinking I'll try some more bleeding/dripping later and maybe eliminate the spongy feel. I probably have alot out of adjustment, just...
I now have brakes! All weekend to get them bled right. I had all new components and decided to go with DOT 5 silicone fluid. Not for...
Long shot here, but make sure the column shifter is in park (I'm sure you tried that, but....). I struggled for days until I rotated the column...
Separate names with a comma.
