I forgot to mention that the alternator I am using has an internal regulator, so all of that is off mine, that is why I am able to run the wire...
This might be interesting http://adcache.collectorcartraderonline.com/10/9/2/79349792.htm
1970 Maverick, no nitrous on this run.
I ran the wire from the Alternator to the battery side of the starter solenoid, mine is on the inner fender on the right side, that way the wire...
Too bad they didn't go into a little more detail about performance numbers and the trick hood.
Alternator problem solved When I had the single wire alternator on the car, you have to run a relay to shut the alternator off when you turn the...
I have a CNC plasma cutter, and a press brake, makes quick work of it.
Picture of fan shroud There is a picture of the shroud in a post labeled Cal-Tracs, aluminum radiator, oil cooler. I have a shroud that I...
I went with a 16 inch Spal fan. It is a puller. I fabricated my own fan shroud that covers the whole radiator.
Well, after installing an aluminum Afco radiator without a internal tranny cooler, my engine temps will stay 180 around town, where before they...
Thank you, I have to hook the pressure side up to the side of the cooler with the thermostatic switch.
Can anyone tell me which port for the trans lines is the out port on a C4, the forward on or the back one?
Grew up in the farming country and a lot of us raced what we drove all week. A friend had a right hand drive, two wheel drive, International...
That is hilarious, now that it is over and no one got hurt! I fly for a living and was flying a air ambulance flight and kicked one mounted under...
I wanted a radiator without a tranny cooler in it, because I live in Lake Havasu City, Az. where it gets 125 in the summer, and can stay above 100...
Chassis engineering has them Try this link, they are 95.00....
This is the insert I built to replace the stock gas tank. I had to raise the 12 gallon cell up to clear the B&M fan cooled trans cooler. This is...
Gap around radiator I have .032 aluminum that I will use to fill in the space around the radiator. I will have it riveted to the cowl support and...
Bt the way-Radiator fan and shroud The fan is a SPAL fan and the shroud is a piece I made.
Separate names with a comma.
