I borrowed a spot welder from a computer customer of mine that runs a body shop. Started on it this afternoon, got 5 out of about 13 welds that...
Thanks for the info guys. If my week will get out of my way and let me get in gear I'll have some partially assembled pics soon.
I've got a Lokar cable on my AOD, very simple, not a bit of trouble out of it. Doesn't the kick down on a 6 cyl C4 work backwards from a V8 C4?
Since I'm getting started back on my car I've been fiddling with Engine Analyzer, trying to decide what I'm doing with the car. I'm familiar with...
Thanks guys. I used rustoleum on the cowl. A test spot survived the paint remover. Aside from a tiny bit of surface rust the replacement cowl is...
Finally getting back on my car, long story completely edited out, cowl is my first project. Cowl is just about ready to go, depending on the...
gotcha. Thanks. :)
Stock shifter hump?
What floor shifter do you have? I'm probably going to swap, but I don't want to have to reach for the shifter.
Hooker Super Competition headers work with a column shifter. I don't remember the model number off hand.
There is a box mounted below the radio, I do believe related to the seatbelt lockout. Mine never prevented me from starting my car until the cowl...
I kind of like the sound of that. I've got a Holley 750 I can bolt on there, been sitting a while tho. I didn't get the chance to play with it...
We weren't counting the 60's Comets. I didn't think about them having a 390 to be honest. If I did it, there would be very little Comet front...
I just got a 1974 F100. Original engine threw a rod shortly after my bud got it, so he had a 390 built for it. Cracked the 390 heads after he had...
It rattles your teeth and the base of your skull before the axle. First Comet I got was like that. Wasn't so bad going down the road, but there...
My cousin has a 289 (292) with AFR 165's, 1.7RR and a Comp Cams 270H. in a 3300lb w/driver Fairlane it ran a 7.96 in the 1/8th. Actually lifted...
:clap: So many of us had the exact same thought. Autolite 4100 is a nice carb as well.
Tips, measure from the center line of your PS valve to a fixed point on your centerlink and try to get your adapter as close to that measurement...
I got one about 7-8 years ago, some Mustang site. The rebuilt PS control valve was going for $120. This is just a PS control valve with all the...
I just got the PS valve adapter and did away with the pump and the cylinder. No muss, no fuss, and quicker steering ratio. Cost about $25 to do...
Separate names with a comma.
