There are several ways to learn stuff, but to remember it 100% of the time takes learning it the hard way.:thumbs2: That being said, I remember a...
I've been thinking about going with a stick on mine as well. The clutch held me back. What master/slave did you use?
Too much fluid can cause this as well. It'll get all foamy, typically doesn't clear up in 10 minutes tho. Not likely the cause in this case, just...
I have one of those adapters that isn't spring loaded. No issues and much tighter steering than the stock setup. I don't know why they would make...
I've had to pull door panels on my old 4 door and work the lock. From the outside it wouldn't unlock, from inside (the door, not the car) it...
I'll be doing this as well. Car is in the shop right now, might as well.
Would anyone mind posting a link? I've searched and found conflicting information.
I keep reading where people are ragging on glasspacks, but most folks seem to like the sound of mine. 1 5/8 longtubes and glasspacks, dual 2 inch...
There are so many posts about ticking sounds coming from the engine that I propose this thread be stickied for all time. Just too much good...
The green one! No, I take it back. The blue one! No, no... the 7/16 nut! Can I phone a friend?
Essentially you have the vacuum line that goes to the distributor, it needs to be on the right port on the carburetor, the other line needs to go...
Bolts are fine. I am reassembling the car after replacing the cowl. There is slack in the wiper arms to the motor.
The grommet came out of my original cowl. I don't know if it was the original grommet or not. It will not go back in the replacement cowl. I'm...
Wasn't my fault! I was working on a AC box, no chemicals!
I tried the grommet without the wiper assembly. It wouldn't go in the hole. I forced it in and it twisted it enough that there was no way to get...
Grommet won't fit through the hole. Fordmaster169, I may get up with you about the wiper assembly. How hard are they to replace with the dash...
If y'all hear about a massive explosion in Alabama, you know I mixed the wrong stuff... lol
I love getting parts for 50-60s cars. You get that deer in the headlights look, and the guy that should be working at a parts store who isn't...
Nice. I've done the electrolysis trick. Regular baking soda works fine. It isn't anything fancy. Something is needed to make the water conduct...
I still have them, somewhere... How important are they?
Separate names with a comma.
