Many years ago the previous owner had a transmission cooler installed. The steel 5/16 OD transmission lines were connected to 11/16 inch OD rubber...
Here are a few shots of the oil plug, the original plastic gasket, and the new fiber gasket. I installed the plug with the fiber gasket but it is...
The existing plastic oil drain plug gasket for my stock 49 year old pan was looking pretty ratty and I replaced it with a fiber one. It leaked,...
This is a good opportunity for folks share their knowledge by writing tech articles. For instance, for those who put in gauges but kept their...
Same here. My wife spotted this one. [ATTACH]
[ATTACH] Here’s how it looks now.
[ATTACH] Changed the oil and filter today. I purchased a Ford Motorcraft FL-1A, white in color with a Motorcraft decal covering about 1/3 of the...
Welcome back, I recently got re-invigorated after stalling out on my inability to find a proper heater box cable but once I got that solved I went...
I stand corrected. The 74’s and onward did not have the spoiler any more. Thanks.
I installed a 24F battery and put the Mav in a lineup of vehicles from the Rockin’ in the Rockies car club. We all cruised down to Dairy Queen...
Thanks for all the input. I purchased a Motomaster 24F from Canadian Tire. I found however, the dimensions were 9-15/16 “ long by 6-5/8” wide by...
Thanks. That would work really well in combination with a 73 Grabber color scheme. For the others, here is what a 73 Grabber looked like. There...
I pulled out the glove compartment box and lower dash component to find the source of my coolant leak. The hose connecting to the top of the...
I haven’t had a dwell/tachometer for many years. The last one was a Sears model. Does anyone have any suggestions for a dwell/ tach from Amazon?...
Well, I never thought my 73 would be a Trailer Queen but it looks like my heater core may have let go while accelerating down the highway. A...
Here’s how it looks prior to reinstalling the front valance panel. There is a slight image of the Bondo glazing underneath the freshly painted...
[ATTACH] Here is a license plate holder I had made. Although the car is a 73, 72 rhymes better. Close enough. :rolleyes:
Here’s a couple of pics of applying the primer and paint. I removed the front valance panel because there was rust where the valance was attached...
Saw this Mav at the car show at the Lobster Bash at Digby, Nova Scotia. [ATTACH] [ATTACH] [ATTACH]
Wow. Good to hear!
Separate names with a comma.
