Some nothing, some have structural foam blocks in places to give it rigidity and some also add moulded plastic framework(mainly in sunroof cars)....
I agree with you that the 5/16" stuff is too small, short and the flat washers will just let the bushings squash out over time. Definitely need a...
Newer headliners are a fabric with foam backer glued to a pressed cardboard like material that is the shape of the headliner.
True. ProTouring cars with large OD tire/wheel combinations will run the driveshaft up hill and dramatically alter working angle requirements....
I used front end alignment shims until I got it where I wanted. Washers will work too. I know it doesn't sound right, but the pinion should point...
I found some excellent information on this site. http://www.iedls.com/ I had the same problem that you are complaining about and I ended up...
The starter is also a good point of reference for trans angle.
Personally, I like chrome, but that painted one looks good on your car with that color. The good thing is that you have 2 bumpers and you can...
Some of our new vehicles have this coating on the wheels. They seem to be very sensitive to solvents and acid based wheel cleaners. I don't get...
I absolutely agree. Anything is better than plastic and dried out jute backer.
I cut down an old outer bearing race and tack welded it to the bearing retainer before pressing the bearing and retainer on the axle. I figured I...
I like the idea of the separator, but as previously stated, unless you seal all of the possible paths for liquid or fire, it won't truly function...
Charged the battery...again. I think this Optima has about had it. Replaced the fuel pressure regulator and drove it home:drive:
Great looking 4 door!:2thumbs:
Looks like an ac compressor with spark plugs... ...and cylinder sealing issues.:D
I have a set of 88 Turbo Coupe seats that have the solid headrest and bolster adjustments and 89 Escort GT seats that have the halo but no bolster...
Very tastefully done! Nice work!
It was great to meet everyone and a big thanks to Brian for organizing it!:tiphat:
I use 72 Mustang covers on my Maverick seat frames, so yes, they physically fit. Fred makes the covers that are identical to the OEM Maverick...
Now that's ART!
Separate names with a comma.
