Ever ran the pin in the oil ring before? Very nice piston I just liked the coated mahle better 423 grams 1.5mm ring. Don't have to pin oil ring....
gulupo, i,m getting ready to do the 8.8 swap, did you find out how the late must. rear compares in width to 8 inch in the mav's. does anybody know...
Thanks Don, Do You Know What Would Be The Easiest Doner
That Makes Perfect Sense But I'm Running Out Of Money As You Would Expect.:2cents: THIS IS WHAT I'M LEFT WITH, EARLIER THREADS SAY MONARC OR...
Not Positive Whats Going To End Up At The Wheel, But We Know Motor To Be Between 540 To 560, It's Almost Done But I Want To Get The Rest Of The...
Hey Guys I Looking For You Fast Guys For Some Help!! How Long Would My 8inch. 4.62 Gear Hold With A 4000 Stall Or Would It. Looking At Maybe 8.8,...
you can use a test light or volt meter to see if your getting voltage to the fuse & OUT OF THE FUSE
could the pop have been the plate craking and causing a vacumm leak, maybe you carb is to rich & thats why it runs good now??does this sound...
I Just Spent Alot Of Time Researching 331 Stroker ,thats What I'm Building Now, My Opinion? Run A Scat 9000 Crank 3.250 Stroke, Mahle Pistons They...
You Have Smog Test's Up There? Depends On How Big Of Rv Cam Yourtalking About, Probly Need To Stay Under 214 @ .050 And 112 To 116 Lobe
Waaass Uuuuuup!
THE COMBOS ARE ENDLESS TO JUST HAVE A DECENT STREET RACER , THE FIRST 302 I HAD IN MY MAV. WAS BORED.030" 280 COMP. MAGNUM, 69' HEADS WITH LITTLE...
We've Had Alot Of Mav's Over The Years & Most Common Noise We Have Is From The Idler Arm, Like The Guy's Said"grab & Yank"
If I'm Not Mistaken Most C3,c4,c5 Kits Are The Same
Could Be Float Level To Low Also , Most Carbs Have The Jets At Rear Of Bowl, So When You Are Stopping Or Turning Sharp Fuel Rushes Away From Jets...
Glad To Meet Ya, Nice Ride, Like That Air Time Under The Fronts, How's Your Rear End HOLDING UP? Huh Huh, In Your Car I Mean. 70' Mav, 336...
You've Got The 6208 Right?or 6208-1, LOOKS LIKE IT P.S. FOUND PIC'S OF YOUR ENGINE BAY , LOOKS REAL NICE, I THINK YOU NEED TO GO AHEAD & SEND ME...
Ok, Ok, I'm Just Trying To Save Some Money But I Guess Thats Not Going To Happen. Anybody Got Some 6208 Or 6208-1 They Would Sell To A Pour...
I See , I Wounder If They Wight Work On Mine Becouse My Canfields Have A .400 Higher Exhaust Port (includes Bolt On Position) Maybe?
Easy There, 351w Firing Order Is Great , They Say It's Easier On The Bottom End Becouse Of The Order Change, All You Have To Do Is Rewire The...
Separate names with a comma.
