here you go:tiphat: [IMG] [IMG] [IMG] just be prepared for the oil sensor. it needs a special socket (that i didn't have, of course) to be...
did it yesterday... it took me about 5 hours (don't laugh ... it's my first time:p ) really easy to do. (I did it, so it has to be the most simple...
I'd guess a motorcraft 2100 or 2150:hmmm: [IMG]
ok. I'll take a look on the other side of the bay when I get home. at least I'm right about the sensors, it's already a good step! :D
Yeah. It has dual exhaust now. I didn't know you had to recenter it for that. thanks a lot for the answer! One less thing to worry about.:)
don't press the gas to the floor...:biglaugh:
thanks for the idea:2thumbs: still waiting for my radiator:( i'll flush the engine since everything is about to be put back together. other...
ok... so here is what i have: [IMG] [img] I'm asking because of the giant hole that you can see on the picture below and how do I change the...
ok... so just to be sure where i'm going: here is my water temp sender, right? [IMG] and here is my oil pressure sender, right? [IMG] and I...
Thanks for the answer. My level was at full when iddling on park and warmed up. so may be it was a little to much. how do I check if the...
What a shame. I should have ask before. that was $30 well spent. :(
yeah, came with instructions and stuff. i'm not really concerned about how to fix them or plug them it's more: were do you pass the senders and...
nope. just have the 2 big hoses going in and out of the engine and the 2 little lines going to the transmission at the bottom of the radiator. ;)
i didn't... how do i check if the previous owner did? how does it look like? radiator is being repaired right now. should get it back tomorrow.
1. fluid level was checked 2 weeks ago 2. idle speed choke was still on, so about 800 RPM to 900 RPM 3. converter stall speed i have no idea...
hello guys!:thumbs2: i just bought 3 gauges: water temperature, oil pressure and volt. how complicated is it to install them? how do i proceed?...
when i poped the hood after seeing smoke coming out. i could hear something boiling. since the only thing i could see on the floor was...
hello guys! ok... so i have a hole in the topp part of my radiator... so i still had coolant (i'm sure of that) but waiting in line at the drive...
thanks.. at least it's reassuring.... i talk to a garage guy... he's gonna set everything properly for me and give me a little "carburetor 101"...
ok... so i get 12V now... and i can see my choke opening... got few deys above 50 degres lately... problem is still there... seems like the...
Separate names with a comma.
