Did you install the anti rattle clips on the brake pads? If you did not then they will rattle and clack every time you hit the brakes. The clip...
No, it will be ok.
Thank you very much. Just what I needed.
OK I have looked at Cal-Tracks for a while now. I am wondering how the pivot mounts on the spring eye. The spring mount does not lend itself to...
If you would like go to this web site http://www.fays2.net/index.html. Read some of the results down the left side of the page. You have the right...
Even though leaf springs do keep the rear end somewhat centered under the car they will still flex from side to side. There are a few advantages...
Well I made a few wrong turns in my 72 Grabber build. Hey it happens!!!!!!!! So I figured that I had a extra rear section so I would narrow it 6...
Does anyone know what is going on here?
No Mavericks ever had a fluid level sensor. They did have a sensor on the proportioning valve that told you when you lost fluid pressure in either...
I have installed 5 or 6 S&W Racecars cages. They have all been spot on. The car I am building now is a S&W kit with a lot of personal mods to it.
All I can say is WOW!!!!!!!!!!! Did you just skip all the way down the page to the "so called" list of cars or did you read the whole Wiki...
Exactly!!!!!!!!!!!!!!!! We do everything we can to get all the harmonics out of our engines to make them run better. Balancing, having the block...
I have a 76 Comet 4dr that I am parting out that has the rocker molding on it. I will try to get it off without destroying the clips (very hard to...
The balancer should work. All 351W engines were 28oz imbalance.
It may be the valves are too tight. If it is a hydraulic cam then you should have no more than 1/2 to 1 turn on the rocker arm for pre load. (I...
The housing that your air cleaner goes in. No matter what you want to call it.
That hose should connect to your air cleaner housing.
OK, it is a 6 puck clutch!!!!!!!!!!!!!!!! That is the way they work, not so friendly on the street. But they sure do nice on the track.
There is a stud on the back of the stock radio. Take the nut off the back and the 4 screws that hold in the mount under the front lip of the...
http://www.northwestoffroad.com/parts/engineswap.php will have all the adapters for the install you will ever need to do the job. There are many...
Separate names with a comma.
