So after tearing it all apart and nothing was wrong inside,I put it all back together and it still did the same thing. so I took off the cable and...
already started to tear it apart, and Ill let you know what it is...I do have a clutch cable setup on it too but im guessing the bushing on the...
finally go the car going and got it idling correctly. NOW my clutch pedal is very hard to press in...It was working perfectly fine before I got...
I forgot what the casting numbers where but last time I had checked them online, it said it was a 79 block. Ive been looking online and cant find...
I know this isnt a mexican 302 block but was just wondering if anybody elses 302 block had these humps on their blocks
i had bought a bottle of the howards cams break in lube http://www.summitracing.com/parts/hrs-99000/overview/ Ill probably go with the 20w-50 vr...
just got the cam in earlier today..nothing fancy small lift 471. 471. sum-3601 hopefully itll be decent for now till I start doing my next build :)
same here...
Ok cool those usually have the 2.95 gearing for 1st and handle more torque 300 ft.lbs im thinking
What year vehicle is that t5 out of?
thats really tempting me to toss my stock rear end back and get the 4.11's out :bouncy:
youd be cruising 70 mph at 1700 rpm which is pretty sweet :)
In my opinion.. any way you go short of completely replacing both the cam and lifters is just going to be a bandaid approach to buy you some time....
it looks polished to me and I never felt and power loss as well..im guessing thats why the poly loc was fully out but still on tight as well...
I took some more pictures here...
idk if you can see it but its dished in pretty good on it :/
also are the pushrods supposed to be easy to spin still but have resistance on them after locking the poly loc?
looking to see where its hitting inside the valve cover and I see no damage inside of it at all :/ also it was the lifter its was rounded out...
So tomorrow im going to tear off the intake and Ill let yall know what I find and whats wrong with it :)
ok just checked it in its on there very tight not loose at all
Separate names with a comma.
