I would remove the strut and see if the rest of it moves freely. Inspect the strut while you have it out, I have only seen this once, but I had a...
First check for clean and tight battery terminals, then if that's not it have a buddy try to start it while you tap the starter with a hammer. If...
You could cut out the factory front suspension, and install leaf springs and a straight axle like a gasser. Then do a spring over axle conversion...
I would guess ignition switch.
Make sure the converter drain is through one of the holes in the flex plate. When I did my first motor swap I made that mistake and had the same...
The pistons, rods, and crank aren't the weak link, the block is. If you keep it under 500hp and keep the rpms low you should be fine.
The push rods look too short to me.
I don't have any personal experience with pro comps, but I've heard if you buy them bare and assemble with good valve train parts they're a decent...
I believe only the 5 speed cars had the steel gear.
More than likely an issue with the modulator, that's what mine did. Also you can use a ft-lbs torque wrench to adjust the bands. 120 in-lbs=10ft-lbs.
I am far from an expert on the subject, but using heads with too large an intake runner your throttle response is going to be lazy, and will hurt...
Went and checked, I have the 4 leafs.
How fast do you want to go exactly? You could always just spray what you already have. Also 200cc runners are really big on a 302. I would look...
I believe I have the 4 leaf springs, but can't remember, I'll check when I get home.
I have suspension king springs I remember paying more for mine but that was in 2011. They seem to ride alright imo.
Those are great engines, but you're gonna need to get creative if you plan on running the p heads.
Had he said there is no replacement for displacement I would agree. But he said substitute, a turbo small block with make similar power to the...
There is a substitute, its called forced induction.
Since he has a knock changing the bearings wouldn't do him any good, as the journal is most likely no longer smooth or round.
Separate names with a comma.
