I just go out and tighten or remove a few bolts and go back in, then come out ever hour or so.. I figure some progress is better than none..
last i recall the stock front grananda maverick rotor has a .554 0r so knurl size... the closest that i have found so far is the the ARP 100-7706
Around what time Gene?
Just call up rare parts an speak with Glen.. he knows the issue and will take car of you.. he ended sending me the correct one even though I...
tempting but so flippen far from me....
Any good alignment shops in the valley?.. looking for one that is good with "custom" alignment settings? Firestone aligned the Comet with...
Another thing I forgot to mention also from the lack of caster is the "return-ability" of the steering back to center after making a turn... I...
Would you happen to still have the part number?
Do you happen to have the part number for them... from my understanding the stock disc brake studs are like a .5xx knurl and the aftermarket ones...
Whats used to control caster... shimming the upper arm or the strut rods?.. I thought the later suspension 75 or so + the upper wasn't adjustable...
Yes
I haven't found anything like that... have a link or pic..please?
Did you have to drill out the rotors to take the bigger knurl size of the longer studs or were the studs the correct size?
Hey guys, I finally got the suspension redone on the Comet... and not knowing a good alignment shop around me, I took the car down to Firestone.....
I had the same issue with those felpros 1262 or the like... there are some with a S in the part number that have a steel shim in the gasket... I...
Longer than stock... local track keeps hassling me for having welds and the stud not being long enough
Hey Fellas, From what I gather, no one ( ARP, Moroso etc.) makes a longer wheel stud that fits the maverick/comet/granada rotor without drilling...
Hey fellas, if its not one thing its another... the newest issue is trying to get the brake system bleed.. which isn't working too good.. one...
You cant enlarge the hole without weakening the spacers that tack welded to the plate.. what I did end up doing was cut the plate in half and...
Alright Fellas, hit another wall today.. it must be a year thing or something.. the tin I got for the manual master has a slightly different bolt...
Separate names with a comma.
