Used to be an oil detergent additive called CD-2 Alemite you could add to the oil to clean out the sludge. I used it back in the 70's and it...
What kind of mods were needed to install the manual rack ? And do you want to sell it ?
It could also be a broken valve spring or a cam lobe wiped. Either way, you need to find out exactly what it is before running it again....
I'm running a 2004 Mustang driveshaft in my 77 2 dr Comet behind a Toploader 4 speed. Fits perfect.
:lolup:That's not the only thing they get in the way of...…………… Especially with a V8:coco:
Down and I always adjusted it in neutral. A floor shifter C4 would be pointed up.
I'd give you mine, if I knew what I did with it. I put a Nascar fuel cell in the trunk of my 77.
Flush the oil pan with gas or diesel. Aluminum cuttings aren't the disaster everyone seems to think. The disaster would be a broken drill bit. If...
:idea: Splash back ? Hold and control the nozzle. :slap: :stirthepot::thumbs2:
I would set it to where both fans come on at 190 then. How did you mount sensors in the heads ? Even so the temps in the teens isn't that hot....
Only problem is who knows if it even has the original carb on it now. Probably not after 40+ years
A better question to ask is what intake are you running now ? I fit 3x2's under the hood of my 77 Comet with the stock height oval air cleaner...
192* with a 180 T-Stat is normal. The T-Stat opens at 180. Your hand held is taking a temp from the outside the engine, again, normal to be...
You need a throttle cable bracket from any 68-70's car to make the throttle cable work. Check on ebay or post a "parts wanted" ad here. As for...
Reason I mentioned the 5 bolt blocks is that all those so called 64-1/2 Mustangs were labeled 65's by Ford. And after 50+ years and it being an...
If that 65 block has a 5 bolt bellhousing pattern, then it won't bolt up to your transmission. Use the torque converter in the transmission you're...
Or you can use the generic small block Ford alternator brackets to mount the alternator. These don't use the adapter bracket on the head to mount...
You can get those pulleys from the Vic/Marquis/Towncar setup too.
The 94-95 Stang setup used the same timing cover used later on the Explorer/Mountaineer FEAD but the water pumps were different. The mid 88+ up...
That's the one I mentioned. You can get rid of the A/C which was mounted on the passenger side along with the smog pump. I used this setup for my...
Separate names with a comma.
