What have you got for a steering box? I was experiencing the same thing two years ago, I found I had ply in my steering rack causing the car...
The oil pan and pickup would be the same as used on all 1965 to 1973 small block mustang and all V8 mavericks! If the engine came from a...
The band in a C4 don't have to be an old one to brake the ear off , My wife had a new 1982 mustang with a C5 that had the ear brake off when...
Yes a 3.55 gear with a C-4 will spin the engine a little higher at free way speed than is good for fuel economy, what would be a nice setup would...
You are correct Autokrafters does sell the Frame Mounts for the Maverick, thanks for pointing them out!
yes he did but with out the frame mounts the engine mounts don't do a lot of good!
The frame mount is the one that is hard to find, don't think any body reproduces them!
I was recommended the 46 hydraulic oil as well but was told not to use if doing a lot of street driving! The reason this is used in stead of...
You are correct the welded boss 302 heads were not allowed in the M/P classes, to run the pieced to gether heads you had to run Altered or...
This section of the forum is called drag racing I would assume the guys that post here are interested in building a combination to drag race!...
Any body that builds a car for use on the drag strip will gear the car to peek horsepower at the RPM they cross the finish line! I f the...
The reason for the 302 being called the 5.0 was back in 1966 when the Trans/AM race series first started the engine size limit was 5.0...
Yes with a 26 inch tire and turning that kind of speed you need a high gear!
I have to agree with switching to a Petronix conversion, it eliminates the need for a Dura spark box . to make a point fire into a electronic...
4.9 is not correct ether it would be 4.95 but that is getting a little sticky! 61 x 4.9 is 298.9 ! 61 x 4.95 is 301.9!
Thanks for the reply, I was real disappointed in the results of removing the rag joint and replacing it with a universal! It is to bad the...
Just to give you an idea were to be! In my car with 28.5 tire 5.14 gear I run 112.25 -at 12.00 turning 6800 RPM over the line! A 3.73 gear...
I just switched the rag joint in my car that goes from my rack to my steering column , I did this to gain clearance between the steering...
He is in finland and he don't have a V8 available as I under stand, that is why he is talking some kind of 6!
I'm not familiar with the Edelbrock E street but I have seen a Fast EZ EFI on a 347 with a victor JR that runs smooth as a kitten on the...
Separate names with a comma.
