How much was the cam kit?
And another question. I have a 800 holley center squirter that works great except.its fouling plugs and obviously too big. Could I just the jets...
Ok thanks. Any idea on the jet sizes I listed. I reset the idle screws to 1 1/2 turns out and I will bust out the timing light and vac gauge and...
Idle screws were 2 1/2 turns out each.
Adjustments seem fine. 28 primary 37 secondary White cam ( I think ) #1 position 6.5 pv primary with 67h jets No pv secondary with 73h jets
Used I pulled it earlier I will go look and see what's in it.
So I replaced the massively oversized holley 800 on the maverick with a holley 650 mechanical secondary. I'm getting a hesistation / stumble in...
I have to get up underneath of the car today and measure it out and see what I get. I'm guessing with the info you guys gave me that the previous...
Yeah I know its just a bad habit and an overly used common term to call them all posi since most people wouldn't have a clue what you were talking...
Ok thanks I appreciate the info.
After putting the 3 speed manual toploader in the car I noticed that the driveshaft might be a touch on the short side. The driveshaft does reach...
I'm in north carolina. I'm pribably going to replace the one valve spring and get a set of aluminum heads later on this year and swap the gt40s on...
Just got back inside. Broken exhaust valve spring..., debating now whether I replace it or pull the heads and have them cut for the dual springs I...
Ok so the results are in.... Cylinders: 1: 95 2: 0 dry 5 wet 3: 115 4: 100 5: 110 6: 100 7: 100 8: 105 So not what I was expecting.... burnt...
I had a holley double pumper on the lincoln but ditched it for a vac secondary edelbrock ( what i had laying around ). I put the double pumper on...
Ive got a good running carb on it. Tuned it very recently. I got the car to idle and all that but its just not what it was a few days ago. Its...
Thing is driving me crazy. Valve train noise but all the sorings look fine. All the hardware is torwued correct. Still have the miss. Retimed and...
Well coil had no effect. I am hearing some valve train noise on the driver side. Im willing to bet i broke yet another valve spring and if i did...
No popping that i can hear. Putting a new coil on today. Will see what that does.
Im gonna check the coil and see what happens there. If that doesnt pan out ill start doing.compression checks. My best bet would be drivers side.
Separate names with a comma.
