Beautiful!
Thanks and no way, I love my yellow wires, they match the coil!
I have installed my battery hold down, corrected a motor mount bracket that was wrong and also installed the correct radiator. In hindsight I...
Looks that way Everrett. False alarm I reckon. I dont want any troubles on my travels this year. There is a lot of new stuff under the hood and...
Just pulled both cooling lines of the radiator and just like yesterday, only a few drops of fluid. I drove the car about 40 miles yesterday so I...
Wow, thanks Ken! I will take you up on that offer. I will PM you my address, just let me know what the shipping is and I can paypal you (extra...
Thanks guys. I have no issues with driveabilty, it shifts great. The trans was out of the car for my engine rebuild. While out, I replaced the...
Oh, I understand now. Since the cooling lines come out near the top of the trans, I didnt think drain back was possible.
Um lets see, the last time I drove it was 8 days ago I think. Today, I started it and backed it out of the garage to swap the radiator. I dont...
I would be relieved to see a geyser, but I dont think the fluid is flowing to the radiator. There was literally 4 drops of fluid out of one line...
I would say about a half inch difference. The one on the left is for a 250, the right is a 200. [IMG]
I replaced my radiator today and only a few drops of fluid dripped out when I disconnected the trans cooling lines. Im concerned there is little...
Mine was black rattle can for years. Was gloss to start with, showed a lot of the flaws. Then went to flat, looked much better. Just did what...
The 200s had an R stamped on them, the 250s I had were blank. That might be where things went wrong for me. I thought the R was right and the...
Yup, had the wrong part on the right side. Swapped it out and it caused my fan to hit the shroud. Its because ybe upper radiator hose is not in...
Thanks for confirming that guys. Its funny how things roll around in your head for a while and then all of a sudden a light bulb goes off. I had a...
One last thing......there are tear drop shaped holes in the engine stand, The motor mount bolts are not at the bottom of those holes, they are...
Comet Fever, that is the part I think is wrong, thanks. Jamie, I have a Carter YF on it, but the bottom section is about an inch shorter than the...
Craig, I should have mentioned Im using the shroud and fan from a 250 a/c car. Jeff, I better check what I have on the car. The part the bolts...
Im curious about something. I recently swapped out my my 200I6 for 250I6 and I have trouble with my breather hitting the hood. My carb isnt...
Separate names with a comma.
