Thanks rthomas.
It can't cost 1750 to get a set restored?? Right?? !! Am I going crazy here or is something really crazy about getting nearly 2k for a set of...
Hmmmm I could always run a tap in it and plug it with a bolt or something of the sorts. Hate to do that then have to use it down the line and have...
You need to get a timing light and see where your at right now with your timing settings......base timing....all in....rpm the mechanical advance...
baddad457, I was referring to already having the front sump dipstick tube and dipstick from my front sump setup. I didn't get the dipstick tube...
My suggestion is take out the accel kit and give it a go. If it fixes at least you know for sure that's the problem. Sounds like that's your issue.
Thanks a bunch for the info. I already have the dipstick tube. I've got to swap oil pans anyways so when I pull it I will drill the cover. Thanks...
What size bit did u use? Thanks
I'm using an electric fuel pump. And no using the roller timing cover. I guess I will just use the roller dipstick and fill the oil the first...
I got em tapped out and in. Another question Can the roller side dipstick be used with headers or can I drill the timing cover for the...
Is there a difference between thread sizes from roller to non roller? My non roller bolts won't thread in but a few turns into my new roller...
Well seems easier to swap he gt40 non p's onto the roller motor and just transfer over my roller rockers. Do 1.72 roller rockers clear on a stock...
Look for casting numbers on the block. Its a very common upgrade for stang guys to throw a cobra intake, etc, etc, etc on. I'd go hydraulic clutch...
Not sure of cam specs. I got the assembled short block and all the parts in a package deal from a guy who couldn't afford to have it finished and...
Good to hear. I'll be holding on to my street demon for a while. In the works of picking up a roller motor and auto so hopefully that goes as planned.
Readings are in..... Engine cold Carb removed 5 turns per cylinder Readings ranged from 125-130 except cylinder 6 which pulled a 139.....its...
bmcdaniel I did all of those as well. My air fuel mixture was pretty much spot on with 18hg of vac at idle. Choke seemed to be set up fine when i...
Oh and not sure if its my stock covers or not but when the engine gets up to operating temps and I play with the car a bit ( with the gas of...
Ok I got two guys in this thread with the same 625 street demon. I picked mine up and put it on my itty bitty 306 and it seemed like it was really...
Compression checks coming tomorrow. I'll post results here. Dual plane intake is on the way as soon as the buyer for my f100 shows up lol. Going...
Separate names with a comma.
