[ATTACH] Drove my car to a local car show and talked to quite a few people about it. Needless to say the only Maverick there. In front of it were...
Thanks Everett! I do have a pretty wide grin on my face when I drive it! I've been extremely blessed in the selection of parts that I've assembled...
Everett, we replaced the top loader 4-speed I had previously installed with a new TKO-600 5-speed at the time of the engine installation. The rear...
We just installed a Blueprint Engines 347 in my car. It has 415 hp & 427 lbs/ft of torque and I'm just finishing up the break-in mileage. It is a...
I found dimples in the floor along the tunnel where the inside bolts go on mine. I used Summit Racing brackets and seat sliders as I didn't have...
Thanks! He also made my tach mount and the gauge panel that replaced the dash A/C opening. When I reinstall the A/C I'll put those vents under the...
I don't remember exactly how long they were but they're very short. I tried to space them out to look uniform and paid attention when I had the...
I used stainless self tapping screws but plan to pull them in exchange for stainless button head Allen screws. I want to retain access to the...
Yes, they do. I have them in my car. Bruce[ATTACH]
I tried the clutch ball bracket that bolts to the bell housing location but it interfered with the Hooker headers I am using. So I measured the...
We located & drilled the hole for the engine side pivot ball in the late model block of the crate engine I bought. Unfortunately I didn't get any...
Here is what they look like from the original run and they are 1.75" diameter. [IMG] Bruce P.S. Craig, I would like one set of four too please.
I used a set of wheel adapters on my 1st Maverick and I never had the slightest problem with them. If you do use them just be sure you install...
I have a TKO-600 in my '72 and had to cut the top of the tunnel for clearance. I removed the top 2" - 2 1/2" from where the tunnel meets the the...
These are Hooker #6901 with a home built 2 1/4" dual exhaust. The pitman arm contacts the header tube but has never been a problem. My exhaust...
You might talk to John Dinkel, owner of Open Tracker Racing: Opentracker Racing Products, LLC P.O. Box 252 Carmel Valley, CA 93924 Ph/FAX - (831)...
I agree with Craig. When I swapped to front disc brakes I felt no booster was necessary. Bruce
I have those seats as well. The last time I looked they have 'kits' that include their seats, covers, sliders and mounting brackets. Summit...
Jensen, Sending you a PM. Bruce
At a car show I had a woman tell me that she had a Maverick once that was the same color as mine but her car was shorter than mine. I asked her if...
Separate names with a comma.
