Coil over mods Steve H did this on his car back about 4 years ago. Here is a link to the archives that show the finished product....
I have that section of a car that I can bring up to you with the quarter panel, if you like. Please post pictures of the damaged area so I know...
No. Wrong track width.
I will be there at 7:00. Driving the nasty orange beater. 8-)Should be lots of fun anyway. See you all there.
Fantastic! I am glad you got the swap done and are happy with the results. :2thumbs: Of course this will just be the start...rear...
Autoworks International (619-401-6900) makes a motor mount (similar to the Ron Morris Motor mount for Mustangs) that was designed for the...
I went and took measurements from a couple of the cars we have done at the shop. The problem is that if you use the stock trans mount location,...
Questions concerning the Fox body double hump oil pans. The stock Ford double hump pans for 5.0 and 351 will work well with the R&C crossmember...
It is the brace that causes the conflict. I initially trimmed it with a regular old cutoff wheel while lying on my back under the car. I just used...
I also put an EFI 5.0 and AOD into an early '70 Maverick. The problems all occur at the trans tunnel brace and the trans mount. With the trans...
I have seen this used on Mustangs before. It works well. There are some caveats though. If your trans tunnel support is narrower than a Mustang,...
Okay, I would like to bring my project car but it will not be running under it's own power by then. I could easily trailer it from San Diego, but...
I wouldn't knock Chinese manufactured parts. Just like in the US, each company does things differently and quality control varies greatly by...
I was considering buying one of these myself. When I saw this P.O.S., I knew I had to show the rest of you what I was seeing. Yes, it would work....
A customer brought in a Summit Stage 3 intake to show me the other day. Here are a few pictures of it. This is essentially an Edelbrock Air-Gap...
Yes, I really do want to hear that yours rolls straight at 135. Can you say guinea pig? :evilsmile At $3000, I also am very interested. I showed...
Have any of you ever run an Offy Dual Port 360 intake before? The premise of these manifolds is : the manifold is split into two separate runner...
These are apparently still being sold but everyplace I could find selling them listed a price of $345 or higher. I paid $200 for it figuring that...
I went to a local swap meet today and found an intake manifold that I thought might generate some interest. It is a high rise dual plane manifold...
I bought this manifold at a local swap meet. 8-)
Separate names with a comma.
