Bigger cam with better heads and NOS will shurely bring up the POWER ! :D Electric fuel pump is a good place to start , a good puller at 1200 CFM...
Compcams E-Z valve lash adjustment tool $49.39 at Summit wrench and T handle Richard:cool:
Gap & Timing? I have .045 gap also with 38 degrees timing , runs great ! Good luck at the track and show those "KAZOOS" muffler kids a thing or...
Silly question Do you not have to prime the lifters before?:confused:
I need to replace my starter on 302 C4 157 tooth flexplate/bellhousing . Is there a small diameter starter availiable for more clearance or from...
Welcome, makes sense to me and a beauty it is ! :clap:
Thanks , I don't think they clear the steering shaft! Richard:(
OK I'm building a 85 Ranger with a 302 and I know that Maverick exhaust manifolds work . Is there a header that works from a Mav or comet ? Also...
Is that the slow learner point of view Rick ?:D LOL That does sound about right after the fact ! Been there , done that and got the bills to...
That would make a nice tow vehicle for the race car!:clap: :bananaman :D
The Caltracs are very good till you hit 9.75 second 1/4's At this point you lose your traction and have to go with ladder bars and coil over...
6901'S Do these Hookers really fit well and do the collectors come out away from the tranny? I understand these are a square port design 1 5/8 ,...
Mine is loose with the stock rubber bushings but the lakewood 90/10 front shocks work really well ! It is time to call PST for the front end poly...
Are cars are twins!!! Well almost , I have 1.65 60ft timeslips 7.62 1/8 mile but almost sea level and 39 degees timing:) Did coil over and...
I am running a 9" slick and have 12.06 at 110mph , will the stock rear suspension hold the footprint with the big gears? I am going with Victor...
I also change every month and it is so clean I give it to the chevy guy down the street!!;) :D :cool:
Sounds close to mine , 6500rpm shift with 456 gears going through the traps at 7000 rpm . I have a 4200 converter in the C4 Lentech trans . I...
I gained half a second by adding a 14" collector extension . Made them with two flange's and 3" bus pipe!:) :D
I like the Lokar , it is ajustible and can have mount on the firewall or the rear of the engine !:)
What gears are best for 1/8 mile in a 9 inch diff ?:confused:
Separate names with a comma.
