The ones I had rusted together around the center. I used Muriatic acid and a paint brush to eat off all the rust. Once the rust was gone both...
wow , what a good looking car. That thing is in great shape!
I have built just about every form of a 351w there is. Its my favorate motor. With that being said I have not done many 302's. Although Im not...
Scat or eagle doesnt really matter as long as you have all the parts re-done at a machine shop. Personally I would sell the 302 and buy a 351w...
71 comet GT Originaly do the under side of hoods have any stickers or come from the factory with any type of heat shield felt material?
Im going to say who ever posted that is wrong. The 7.5" wasnt even made until 1979
I could be wrong but I dont think the 7.5 came out till 79 or so.
All V8 & 6cylinder spindles and wheel bearings are the same. The only difference is because of the drum size. 5 lugs go up to the 10" drum. So...
Im not sure which ignition system your using, but malloy unilites tend to have this type of problem when going bad where one day they start the...
Lets assume your comment is correct then as the gap increases the power needed to spark the given gap must increase. Meaning more gap equals more...
I have noticed that all articals that start with Build X motor for under X amount of dollars, always starts with we got a motor at a junk yard and...
Thats exactly why you can run more gap when using MSD. MSD increases both the voltage and amps. Running the smallest gap possible just means you...
GAP is relative to Compression Ratio The basic rule is that as compression ratio increases then spark plug gap decreases. This means if your...
I have lots of printed circuits. I have not really seen these go bad. The problem I have is I cant find the clear plastic window for the gauges....
Pro-comp heads are the biggest piles of crap you can bolt on your motor. The aluminum they use is the worst grade. The port design and castings...
Fishnrace Thats funny, Im glad to see Im not the only one that keeps getting 50 of those crappy harley seats when I look for maverick parts.
A .060 bored out 289 is almost a 302 anyhow. plus or mius 5 cubic inches is not enough to notice.
No one is complaining about the cost of parts. Im mentioning the fact that the prices are so uneven. It seems like there is no middle ground....
I dont mind paying for some nice parts but sometimes it gets crazy. I saw a maverick gas cap that was all pitted and mangled and the guy was...
I ran basically the same setup in a 71 datsun 240z. Because of the rotors in the blower it would throw all the fuel to the back of the motor so...
Separate names with a comma.
