I want to remove the rear seat bottom in my 1972 so I can trim the capret and have it fit nicely. So the rear seat is definitely going back in....
I got 1968 Cougar tail lights. Wondering will I need a new flasher to work 3 lights on a side? I am putting Mustang bezels in the panel under the...
I am getting close to putting my rebuilt 302 in my 72 Mav. The 302 has the following upgrades: 4bbl headers x pipes performance camshaft...
71 gold thats the same loaner im using
napa napa had mine for my 72, fits fine
I wasnt able to get my coil springs out of my 72 MAV 302 before my wife was hollaring for me to come in to help out with something. I got to the...
The more I work and restore, the more I find. Does anyone have a kit of all those rubber parts and bushings in the steering and suspension...
new one I picked up weel built aluminum one on ebay for $200. Looks good well made. Wont need another after that
Did it Since my ife got me fitted carper for hristmas it made sense to pull out the seat. Had lots of room and got it done. Thnaks for your...
Craig if you have one toss it in with the radio Thanks, I send cand you $ if need be.
The other day I pulled out the master cylinder and did not see too well what I was doing as vision was obsructed and I could not get a good angle....
In my rebuild I finished painting and upgrading the engine compartment. I replaced the voltage regulatior with a modern one. The regulator has...
Thanks guys I followed your excellent advice. Found the culprit. Was able to find a Chrysler wire pin of the same size and put it in the harness....
Thanks for the info Can somebody take a look at at color sequene on the first row? Please
I have been rebuiling my 1972 Mav 302 with A/C. Getting ready to start engine re-assembly, but while preparing the engine compartment for paint...
I have a 72 MAV 302-4 wheel drum. I want to get 15 x 8 wheels. I have 5 bolts. Where I am confused is with such things as "back spacing", "wheel...
My cylinder heads are in getting polished and rebuilt. SHould I pay the extra $50 to match the cylinder exhaust ports with the headers? Is it...
I am going to go with aftermarket Torino or Shelby brake lights but they have no white back up light. I am thinking about putting them in that 6...
I am finishing up my rebuild, going well. What options do I have for the rear axle to get both rear wheels moving. I have a 302, beefed up with a...
I pulled my 302-1972 this is what I want to do. I would appreciate your equipment recommendations. My goal is fast 0-60 but a good street car. 1)...
Separate names with a comma.
