I have had the mav running for about a month, it has started every time accept today. I turned the key and nothing,no clicking. no turning over...
Wish we could help but we are on the other coast
what kills me is my job, i run a lot of heat sensitive measuring instruments, my lab is 68 deg year round, so being in here 8-10 hrs a day then...
This heat is really interfering with my to do list., its been over 100 deg all week and today the heat index is suppose to be 110-115deg and no...
Well i did the cross member yesterday,(thanks Craig S. cross member was perfect) installed the header collectors, got the electric choke set on...
1st Install the double hump cross member (should be here today) 2nd Exhaust open headers kinda noisy 3rd Front end alignment 4th install...
Thats what we thought.:o Man 15.20s with a straight six thats impressive :bowdown:
Well the accelerator cable seams to be a little stiff since i swapped out the 6cyl for the 302. it is bent into quite an "S" shape. so i bought a...
There was a post on here a couple of weeks ago that showed a tubular cross member that a one of our members makes and sells. Does anyone know who...
on my 75 ,I mounted my holley red pump on the front side of the tank. There is a plate about 1.5 in in front of my tank its about 5 in wide and 18...
Finally after 5 months of rebulding and installing the 302 its running :drive: i loaded some vid's on youtube under "1975 michigan maverick 302...
Also check your vacuum lines, its a long shot this, usually makes it run crappy all the time
I bought a PRP throttle bracket off of ebay, it's kinda pricey $75.00 but i think it looks cool, im going to install it tonight. i'll take a pic...
After spending 2.5 hours last night bending,beating and denting the drivers side hooker header on im thinking it was a mistake, but when i hear...
I will give that a try today...i think the main problem is that the last time i swapped a 6cyl to a V8, Mavericks where still coming off the...
[ATTACH][ATTACH] Today we started the 302 install:cry: what a rotten day. the last problem we ran into is the motor mounts dont line up ( see...
The B&M shifter Problem has been fixed. I had to use an ingenious tool called "the wife" So last night I in listed the help of the wife so i...
I think my 1 and only (1975) will put the count at 1900:clap:
that's kinda what I was thinking, I'm going to make a 1/2 in wide strip of steel with mutable holes in it at work tomorrow and see if I can get...
thank you guys:) for the nice welcome. the wife and i are talking about going to the national Roundup, we will have to play it by ear and see if i...
Separate names with a comma.
