With all of the new fuel line installed you more than likely have metal particles stuck in the needle and seat. I'd unscrew the needles and check...
It's an auto floor shift
Thanks Jeff! I never understood why they made it so hard to access.
Jeff, Can you tell us what you did to lower the fusebox?
The booster rod should have a flat spot on the end of it that rests against the sprung portion of the switch. If it's not flat on the end you have...
Whew, I was beginning to question your judgement! Lol
Had a lifter go on a 429 that looked just like yours. It had around 800 mi. on it. I tore the engine down just to be sure, and after seeing where...
Use the Falcon/ Early Mustang template and your good to go.
I believe everyone was clear with the question but it sounds like your not clear with the answers. The power steering system is independent from...
An adjustable modulator will allow you to fine tune your shift points. It functions off manifold vacuum. The wiped out cam was more than likely...
Thanks Levi, will do!
Cleaned up the Chrysler 300 buckets I picked up at the local yard. Can't beat $17 for the pair! Now to figure out mounting brackets...
The linkage should be the same. Adjust the linkage with the trams and shifter in the neutral position.
Here is a pic with this tire combo.
245/60/14 for the rear and 215/60/14 up front.
If a zinc additive or high zinc break-in oil wasn't used during the initial break-in of the engine you could very well have a lobe slowly...
Welcome to the site!
A weak or broken fuel pump spring can sound like a lifter "tick".
:Welcome: from Spokane WA Looks like you found a pretty straight one.
Shipping is $21.22 via UPS with a 3 day transit time. You can email me at mavguy70@gmail.com for details.
Separate names with a comma.
