The motor mount part # is for a Mustang, you need a 2316
Those look like Mustang mounts. I believe the Maverick ones are shorter.
You need a Maverick specific exhaust manifold, they exit about 3 inches lower.[ATTACH]
All 75 Mavericks have 5 lug suspension components. The springs will be fine with a 302 swap, but you may find the car sits higher in front than...
If you are talking about the clear lens I'm 95% sure they are the same as Mustang, which are reproduced.
That looks good, bet it feels better too!
They were charcoal from the factory.
:Welcome: From Spokane WA! I'm currently working on a 71 with my son and looking for a project Mav for my youngest daughter.
The lens is the same, different housings.
eBay
You can bump your post up to give it more visibility if no one has responded in a while. If no one needs what your selling when you post the...
Great find, keep us updated on your progress.
:Welcome: to the forum! The floor shifter was an option with the 6 and the v8.
I've run into issues with aftermarket pushrods not having a deep enough pad on the end to actuate the switch. I would compare your with a factory...
The compressor is there, but mojo' right on the tower braces.
The red hoses go to the heater, it's probably disconnected because of a core leak. The others appear to be a/c lines. Looks like the compressor...
:Welcome: from Spokane,WA
I have a pair of factory Maverick manifolds if you are interested.
I've used rock auto.com for all of my Maverick brake parts. You can't beat the wholesaler close out prices. You can even get a 5% off code from...
Push the pin from the top out the bottom, then pinch the tabs on the bottom of the clip.
Separate names with a comma.
