The Wire Is Black With A Lt Blue Tracer And Goes To The Headlite Switch And To The Lf Door Switch Do You Have A Door Buzzer In Yours?
As Mav Says You Still Won't Read Current
Remove The Left Kickpanel And Unhook The Domelite Wire Connector And Ck It
pan bolts and valve body bolts (no ck balls to worry about ) then the big nut it's really not bad if you have a way to get under it book says you...
i might be able to help you ron
I Know The Feeling Jeff I'm The Auto Teacher And They Are Giving Me A Bad Time About It Being To Old For The Students To Learn They Want All Hi...
hope everyone has a safe trip and sorry to miss it this year have a great time
take a bucket of water with you and pour it down the ft cowl worth 500 if its good just my 2 cents
does anybody know what other models use the backing plates i got a set of spindles no backing plates i would think most early ford products...
it's usally best to just go there,if you call and ask for a specific item they tend to jack up the price just my observation here in SC
Should Be About In 1/2 To 3/4 From The Edge Of The Bellhousing I Use A 7/16 Box Wrench And Put A Bolt In The Bell Angled To The Convertor To...
I Also Used A Switch That Bolts To The Trans Housing And It Has A St &backup Lites In It
Hey Dan Just Done This And Used A Pinto Indicator But The Blue Plastic That Dims The Bulb Was Gone/broke So I Took A Green Turn Sig Indicator...
i found one off a honda( much thinner)and i while i was at the yard i got a serp pully setup off a crown vic along with the alt and did away with...
i looked on alldata and the fan runs on 12volts, if everything else is right then you would have to put a resistor in the line to drop the voltage...
a/c heaters are defaulted to def when vac is leaking or no vac is getting to the blend doors , if the lines are disconnected at the vac switch...
glad to hear that was the problem, the TFI coil does pack a wallop
Gene With Air ? If So The Wiring Goes Thru A Relay With Br/y Being Hot And Bk Grd Relay Is Turned On By Pcm ,(i By-passed The Pcm) Put The...
Thanks Mav
What Type Paint Should I Use To Paint The Cluster Cover Thanks Ron
Separate names with a comma.
