thats good news on your win if you can find a rpm intake that you can try it may help you more on low-in just keep up the good work and keep us...
THE FORDS ARE COMING SEE YALL IN BAYTOWN WERE GOING IN THE MORNING THEY OPEN 10.00 AM FRIDAY THE FORDMAN
the ram air got me three tenths chepest three tenths i have found for 125.00 just bolt it on its the 4"
WITH HOOD ON
got to cut it
JOHN I BEAT THE TEXAS HEAT WITH THIS RAD HAD A STOCK THREE CORE( AIR CAR) THAT YOU CAN BUY NEW AT AUTO-ZONE IT WORKED FINE THE COOL DOWN TIME IS...
trim the frame for bottom hose
bottom bend frame over to set rad in trim to fit
this is the top
this is a be-cool 1970 mustang 460 radiator had to use the sawsall on it then it droped in the hole
go to fordmuscle tech dept induction for the test on it i have the 4" air box www.ramairbox.com their in canada
i have never ran a 289 my old 302 had 289 rods .927 pin 302 crank 350 chev pistons flat top .025 out of the deck anyway the cam i run is comp cam...
you can run a ground all the way to the block i just used a short groung to frame in back if you have subframe ties one short in front to frame...
had a man make a set of trick springs for my maverick all he needs is the front in weigh with you in the car 135.00 a set i had the 6 cly springs...
Re: 2400lb!!
batterys are bolted in the frame thats why they are on each side
two positive to switch one to starter
short ground to back of frame in front have a short cable to block grounds thru the subframe one hot to starter i used welding lead cable(copper...
both run to starter i run 40 locked on timeing starts very EZ useing the late model permanent magnet starter works much better then the old ford...
Doug i,m ready to rock & roll going to stay home this week-end to shine up the old maverick for fun ford have you got your car ready were going...
Separate names with a comma.
