If I remember right there is a removable panel at the bottom of the dash that hides the fuse box:hmmm:
I have the timing pointer you need. I will trade for you 68 style as I need one for my Cougar. Steve
I've got a REALLY nice used one for $25.00 plus shipping
Had a 77 LTd II once for parts. Had a 28 spline 9 inch rear but housing is way to wide for a maverick.
Looks like Corbin types faster than me. There was no replys when I started typing.
I hate to tell you this but you have what is known as a 69 1/2 Maverick. They are the only ones with a drop in tank. In mid 70 Ford used a full...
Sounds like a bent framerail to me. Mine are smooth all the way up. Use the 69.5 for a backhalf project and build the 73. As the owner of a 69.5...
I bought my Magnum 500s from Summit Racing. Made by Wheel Vintiques. 15x7 and 15x8. Very happy with quality. Steve:thumbsup:
I do not think it will work on a maverick. I have 2 complete bracket sets if you need one. Steve
:D Mine was an original 170 car so thats why it was the same. Its been awhile since I was under the hood of a v8/manual car. Sorry for the error.
Mustang uses the same frame mount. (I have both cars) Steve
I did the same swap on mine and just put a loop in the cable . Sounds hokey but it works just fine. V8 cables are hard to find. Steve:burnout:
Don't forget the radiator too!!!:drive:
289 vs 302 Look at the harmonic balancer. 289's (except hipo) are about 1 inch thick. 302's are about 1-1/2 to 1-3/4 inch. Never heard about the...
Thanks for the reply Craig but my biggest concern is how it comes out of the pump on a 76-77. I looked through all the pics last night and found...
OK guys here's the scoop........I have a 69 1/2 Maverick that I put a 302/c4 combo into and now I'm doing disc brakes and power steering. My...
At one time I was going to build a Fairmont and checked into 5 lug rotors at the auto parts store I was working in. From what I can recall a...
Got a cherry set off of a 76 but Oregon is a long way from Arkansas. Steve
Not a hard job but get a good spring compressor. Steve
They will fit in a 69 with no problem. However I did have to modify my trans x member a bit and the 69 seems to have a smaller tranny tunnel. Steve
Separate names with a comma.
