OK speaking of ghosts we did have a visit apparently. And I guess it was divine. For some unexplained reason it just started working. I have no...
Maybe there is some other ground for the instrument panel that may have been missed when we swapped the engine? It looks like the ground for the...
Ok here's the skinny. I tested the ground (resistance) and it was less than an ohm from the ground in the harness to the negative battery...
Well, I finally got this thing on the road! Thank you all for your valued input. I am having an issue with the high beams that I can't figure...
I normally only deal with electronically controlled engines, so I don't own a timing light. I have it set by ear so that could also be an issue....
MavMan, The vendor says the fan pulls 2350CFM. 71Gold, I was concerned that I would not get a true measurement of coolant temperature if the...
OK. I guess I had things mixed up. I simply moved the one on the left of the intake to the port on the right. The fan is a low profile 16" on...
Hello, Working on a 351W. I bought a fancy temp gauge and it was threaded in a size that I could only install where the heater return line...
My stepson can upgrade the intake. And the heads for that matter. I'm just doing the bare minimum so he has a starting point. It's a 351W. Just...
What is the extra port next to the carb ports? and what can I do with it? Can I block that? What was the original purpose for this?...
Oh, And I did manage to mate the transmission and put a few bolts in. So now I am working with it as a unit. However the transmission mount is...
Ok. I milled down the ribs on the right exhaust manifold. There were no ribs on the left one, but I did take a little off at the bottom where the...
Thank you for your reply. I have the original 302 Motor mounts. I also have two other mounts that I believe were out of a 77 mustang, but they...
Also, it looks like I might have to pull the transmission and install it after the engine because its that tight I cant get the engine on the...
Help! I don't know if I was clear about what I am trying to do but I am having serious problems. I scrapped the whole header plan for now. I have...
OK I will do it myself tomorrow. I truth I had my step son do it. But he is adamant that he counted both ones and came up with the same number....
You are right I had it back assward. I am looking for the 28oz. I have two 50 oz ones now.
I am in the process of doing a 351 swap in a '77 maverick. I know I need a 50oz unbalance flywheel, and these don't seem difficult to find,...
OK thanks. So is there any other wire hot while cranking that I should use? Or should I just hook up a relay? I really feel humbled on this. I...
I have read on here about other people dropping in 351s and that there would be little room for changing plugs and installing headers. Many have...
Separate names with a comma.
