That's interesting, I suppose the fuel in line could also be draining back to the tank? A empty fuel line is going to require quite awhile to...
Once fuel is in the carb and engine shut off, pump has zero to do with keeping there. It's either boiling or leaking off. All of mine have the...
A 22 gal never happened, that's full size model capacity. Here's what I found. [ATTACH]
Where are you getting your info? 1975 and earlier are exempt from emission testing....
It's a early '80s 302 smog motor. It could be built to make good power but it'd need EVERYTHING, including pistons, heads, intake, etc etc. A 351...
Grabber was a specific model, basic engine was the 200, that & three on tree were std. Wanna V8 and/or automatic? Gonna cost you extra. Base...
Doesn't sound as if you are familiar with old cars, in a nutshell anything that can leak or go wrong will. Unless already serviced, the front...
G'luk on your trip.. :thumbs2: Excessive dwell(coil "on" time) is generally what over heats coil & causes leakage. The resistor limits current...
That'd work. Maybe consider a method of cooling? Wanna get real fancy? Mount a cooling fan. Back in day the Motorcraft boxes were generally...
You need to check it out further, coincidences will bite you in the butt... Sounds like the mechanic should go back to school, there is no such...
The Mustang suppliers stock kits with all the small parts.
[ATTACH] I dunno how switches are sold these days(probably one size fits all?) but there are switches for power & manual applications. The power...
If used for long periods of time with inadequate lubrication(never serviced in 40-50 years) the gear and worm can both wear out. A simple clean,...
Just hit me I have a set of '71 Shop manuals, unfortunately removal instructions are a bit vague. Pertinent to this discussion, it says on SOME...
When I rebuild my frontend(s), I'll dial in all the positive caster the strut rods will allow(roughly 4*). At that point rough in the toe, then go...
Likely box needs serviced but adjustments can be made while installed. Squirrely & not returning to center is probably lack of positive caster in...
Requires more than 5A to melt wire insulation, probably there's a short in harness or to ground. I had a wiring to ground short at brake switch in...
Transgo are some of the best shift kits out there. I've installed then in Ford's AOD.
Ford's replacement for top hose is KM615, also fits '70 Mustang with 302. No idea of orig number, the '75 Master Parts lists D2PZ 8260-C for both...
Jeep? Blasphemy, 428CJ = Cobra Jet Here the factory pulleys on my '72 Comet(top) Lower on my Fairlane[ATTACH] [ATTACH]
Separate names with a comma.
