I was thinking about doing that but I was worried that the weld heat would warp my straight surface. Even though I used 1/2" thick angle it could...
Heres a pic of it in primer [ATTACH]
Built this for under $250 and works great.
So I have been thinking of building my own metal brake so I can limit my trips to the local machine shop. The owner thought I was crazy said I...
Problem solved!!!!! Thanks everyone for your input. I decided to go ahead with the mount idea and change all of them out since that is the...
When doesn't it happen Ok, I forgot to mention when the vibration occurs.It starts to happen just above idle, and gets worse until about 65 mph,...
Ok, so I have asked this question before and have tried all of the recommended fixes. Now I am back with more information, but the same...
Flushing the cooler lines, and getting the new nuts for the manifold studs are the only things I have left to do. Other than go pick the...
After almost 4 months of the Mav sitting up on stands I will attempt to reinstall the freshly rebuilt transmission this weekend. I told the shop I...
The best thing about this car is that i finally got a nice drive that isn't all rotted out.
The original bone stock 302, and she says its gonna stay that way!!!
I am thinking about a different muffler so I can hide the tailpipe up behind that rear valance.
The only tyhing I need to do on the outside is buff it out and get some grabber decals made
These are some shots of my one owner 72 Grabber. The only thing that is not original is the paint. The lady had it repainted about 13yrs ago after...
I finally made it home and the bushing,rear seal and housing gasket made it in. I hopefully will get a chance to pull the driveshaft and check the...
More than likely the break was caused by overrevving the engine causing the valve to possibly contact the piston and instead of the pushrod...
Well I am going to change that bushing and seal when I get a chance. While I am at it since I have to pull the mount to get the housing off I am...
When I bought my maverick it had been sitting in a garage for several years. I have everything ready for a test drive and it had a BAD vibration....
Well it's taken me longer than usual to get this project roadworthy. My job keeps me on the road, but I've managed to get alot done between...
SWEET!!!! Thanks for the info. I get along with my local O'Reillys guys pretty well. I have spent several thousand with them over the past couple...
Separate names with a comma.
