Thanks alot for the replies! I suppose I will try to do what I can to learn on my own with information. Perhaps maybe search for a classic car...
Okay so, here is the deal. My maverick is a '70 250 straight 6. I have had it for about 5 years now. I have learned a bit about how to work on it...
[QUOT="Craig Selvey, post: 1027093, member: 21"]If you don't have the right tools....then the job is impossible to do at home. You will need a...
Perhaps you are right, to be honest I have no clue what I am up against at the moment. Once I get home and read up on my Chilton, I will have a...
I need a little bit of insight on how to change out my bushings on my lower front control arms. I called my regular mechanic who said it would...
My maverick has been letting loose little sputters on idle. It's sparratic but doesn't happen often. It will sputter while idleing and bump the...
Seafoam in the gas and oil. I haven't sprayed the carb with any cleaner yet.
It was the throttle blade
My carb was sticking and I tapped out my float, but when I was driving up a hill my car lost all power, sputtered and died. My carb does not move...
It started a bit before I replaced everything but got much worse afterwords. I'm pretty sure it's a fuel problem. My float might be stuck or...
I recently changed out the distributor,plugs and wires. My car has a bit of trouble starting, but when it does it starts to kick off but will...
Well it's all installed. It's running rough though. Do I have to retune my engine?
Ok we got it running again but it's rough. Is there anything that we can use for the measuring on the contact points?
My bad, it wasn't the crank shaft. It was the distributor. We can't seem to get the rotor pointing at the first position without taking it out.
I had to point my rotor in the first firing position
My manual said for me to. It's an old chilton manual from the 70's. The shaft under the distributor body.
So here's the scoop. My buddy and I were changing the condensor, the distributor cap and rotor, and the contact points. We pulled out the...
Separate names with a comma.
