Awesome, thanks for your help.
Yeah, that makes sense. i just figured since i don't drive the car much...it'll be ok. That is the only part i have not replaced. I actually have...
Yes, the cylinder is also new. And yes i left the belt on when i disconnected the hoses? do you think the pump is bad?
Hello, after spending a few hours I finally gave up. I've replaced almost every part of the power steering system in my 71 Maverick with the...
Its 1 inch thick.
If you shave the towers and use the 302 stock manifolds, it will fit. I've taken the motor in and out many times by myself with no issues. By the...
Hi there, the problem stopped when i removed the carb spacer. I still have the hood vents opened (grabber hood) to allow more ventilation.
Thanks, that makes sense. I do have a spacer, and since i have a 351W the carb sits too high almost touching the hood, hence making it hard for...
So i finally got my car on the road after 2 1/2 years, fresh motor and tranny. The car starts right up when cold, but then when it warms up, it...
Thanks, what gears would you recommend? i was thinking 3.73 or 4.10 max?? i don't drive the car a lot, but if i do, i wouldn't want high rpm when...
All stock Original gears, 2.55's i think. Stock heads I got the motor from NAPA - Remanufactured.
I'm curious as to how my mav would do on the quarter mile. here are the specs: Fresh 351W stock Weiand intake manifold 650 Holley 4 barrel MSD...
Thanks, the motor is a fresh 351W stock. 650 cfm holley 4 barrel Weiand intake manifold Pertronix ignitor II/MSD coil Flowmaster 40 series exhaust...
Well, it's been two 1/2 years since i joined this forum. Here is an update on my project, i think i've come a long way. Thanks everyone for the...
Thanks, i appreciate it. i'll be sure to follow these steps as well.
i think i'm starting to figure it out. I got one floater done, i'm working on the other one. As for the fuel mixture screws, they do work because...
Thanks i got the car started. it idles kind of rough though, and it dies if i don't gas it. I'm playing with the floaters little by little and...
One more thing, i do have a fuel regulator that reads 7psi when the engine is running, is that the right psi?
Thanks guys, i just removed the sight plug hole and fuel came out, i also removed the top lock screw and both needles. i just don't know how to...
Hi guys, i just installed a pertronix II ignitor on my mav with a 351w. I adjusted the timing to 10 degrees, i also gapped my spark plugs to .40,...
Separate names with a comma.
