Here's the kit I bought: https://www.jegs.com/i/Speedmaster/746/PCE415.1004/10002/-1 The crank & water pump pulleys are both about 4.5" in...
I have a Gilmer belt running the water pump & alternator. I will transfer it to the 347 we're installing soon. I removed the power steering and...
I purchased a manufactured one (see attachment) from member "Maverick Maniac" way back in 2009 that is much stronger than stock and works...
And the door panels are from Scot Rod Fab. My factory ones were pretty shabby.
I couldn't find any in my saved photos so here are pictures from Summit of what I used. Adjusters are Summit part number G1153 and brackets are...
[ATTACH] [ATTACH] Mine aren't Jazz brand but I think they're similar. Mine are from Summit Racing as are the adjuster slides and steel brackets. I...
My thinking is whenever you do something like this to your front suspension you should have it realigned. You could measure to the top of the...
When I swapped the six for the v-8 in my 1st car, I didn't cut the springs. The weight of the v-8 set the front end down a little. With my current...
What Bob said. My Maverick has one coil cut from the springs but they were supporting a/c and power steering since removed. My very 1st Maverick...
So many things for which to be thankful! Bruce
I bought a complete rear spoiler set from you through a friend off ebay 'cause I missed it here. It arrived packaged very well and is everything...
A friend and I replaced the front suspension (except for the springs) on my Maverick with Open Tracker replacements. I'll finish it up tomorrow...
Absolutely stunning car! Speaking from first hand experience I would not drive on those tires. Just last year I noticed an almost pointed bulge in...
Welcome to the site from central Indiana. Bruce
My other project is our one owner '79 Trans Am. It was my wife's daily driver until about 1987 when it became a "garage/cruise in queen". The body...
Very nicely done Gene! Bruce
I used steel seat adjusters & tracks from Summit Racing when I replaced the factory bench with '87 Mustang GT seats and then later when I adapted...
The invisible glass type product as sold by Z-bart is on my wife's Sport Trac and works very well. In the past I've used Rain-X and like it very...
If I'm recalling correctly there is some minor surgery on the firewall to go to power brakes. I helped a friend install them on his Maverick and...
I drove mine Saturday. Kinda nippy with no heat but still a blast to drive! Bruce
Separate names with a comma.
